Sell me a .22 (i mean the model, not an actual firearm)

I've had different Ruger models and had two S&W-s besides my previous Buck Mark. Finally, I've decided to keep only one, the Browning. I like the design and IMO, it has the best trigger of all.

3-5.jpg
 
I opted for a s&w 41. The browning buckmark udx would be my second choice. It has an aluminum frame, which I would prefer over polymer. The grip on the mark 3 doesn't really appeal to me either but you can get other grips for reasonably cheap. The 22/45 is a polymer frame but you can get the rp model to put on different 1911 grips.

If you want accurate these would be the ones to look at
 
Last edited:
AaronGer said:
I opted for a s&w 41. The browning buckmark udx would be my second choice. It has an aluminum frame, which I would prefer over polymer. The grip on the mark 3 doesn't really appeal to me either but you can get other grips for reasonably cheap. The 22/45 is a polymer frame but you can get the rp model to put on different 1911 grips.

If you want accurate these would be the ones to look at
Click to expand...

Absolutly a great option.. have both and the Buckmark is a winner
 
sillymike said:
What's your budget?

For $$$$$... any of the European offering

- FWB AW93
- Walther GSP/SSP
- Morini CM 22



For $$$
- S&W M41
- Hammerli 208 (if you can find one)
- Benelli MP95
mp+95+E1126834277.jpg



For $$
- Browning Buckmark (had a secret crush on their silhouette model :redface:)
112528_01_browning_buckmark_silhouette_2_640.jpg


If already have a 1911... You could also look for a conversion kit from Marvel.
Click to expand...
Depending on your budget these would also be good options, although more specialized. I've shot the 41 and the Walther GSP. Both are excellent.
 
I have shot a Hi-Standard Military Model that was nice, but my Ruger Mk.III Competition Target Model works like a charm.

Only thing about my Ruger is, the barrel under the front sight was drilled off center by a large visible amount, about 2 degrees. Might not sound like much, but look down the sights and it was annoying as hell.

I re-drilled and tapped a bit further forward, just enough for the holes not to intersect and the trimmed back the front of the sight 1/16" and re-blued the front.

I bought the gun new through mail order and didn't want to screw with warranty crap so I fixed it myself.

I sure wasn't impressed with THAT though, how would that ever pass QC?!! I'm sure someone noticed it and OK'd it anyway.

In my mind, that's a pretty serious FU, something I figured Ruger was beyond.

IMG_0398_zps05bb8ec7.jpg
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom