SFRC has restocked a wide selection of Aimpoint and Spuhr precision mounting hardware, along with a Riton ring set, ideal for dialing in your optic setup.
Aimpoint Micro H-2 4 MOA w/ Low Pic Mount | $906.95
A compact reflex red dot sight trusted by hunters and sport shooters for speed and accuracy.
Aimpoint Mount Micro T-1/T-2 and CompM5 Picatinny | $152.95
A Picatinny mount built for Aimpoint Micro T-1, T-2, and CompM5/M5s sights.
Aimpoint Acro Locking Bar & Threaded Shaft | $35.95
A replacement locking bar and threaded shaft kit for Aimpoint Acro series sights.
Spuhr Aimpoint T-2 Magnifier Mount H57mm/2.25" Pic | $608.95
A robust, lightweight magnifier mount built for use with Aimpoint T-2 red dots and magnifiers.
Spuhr Picatinny Aesthetic Rings 30mm H19/0.75" | $234.95
Hunting series scope rings crafted for a secure, classic-look mounting solution.
Spuhr Bubble Level Assembly | $131.95
An external bubble level assembly for mounting forward on a scope mount body or ring.
Spuhr Wilcox RAPTAR Adapter | $121.95
An interface for attaching a Wilcox RAPTAR, RAPTAR-S (Gen2), RAPTAR Lite ES, or SilencerCo RADIUS laser range finder to an ISMS scope mount.
Spuhr Wilcox RAPTAR-S Adapter, Low | $121.95
The lowest-profile Spuhr interface for attaching Wilcox RAPTAR/RAPTAR-S laser range finders with Picatinny risers to an ISMS scope mount.
Spuhr Leveling Kit, Separate Rings | $52.95
A leveling kit for indexing the reticle to a Picatinny rail on Spuhr SR-series rings.
A spacer for the Spuhr Interface system.
A 4-pack of replacement clamping screws for the Picatinny side clamp on select Spuhr mounts.
A Torx key sized for all screws in the Spuhr ISMS line.
An aluminum scope ring set built for reliability and affordability.
WWW.THEAMMOSOURCE.COM
Aimpoint Micro H-2 4 MOA w/ Low Pic Mount | $906.95
A compact reflex red dot sight trusted by hunters and sport shooters for speed and accuracy.
- 4 MOA dot size
- Includes low Picatinny mount
- Reinforced housing with flip-up lens covers
- Up to 50,000 hours of battery life
Aimpoint Mount Micro T-1/T-2 and CompM5 Picatinny | $152.95
A Picatinny mount built for Aimpoint Micro T-1, T-2, and CompM5/M5s sights.
- Fits Picatinny rail
- Optimized for Micro T-1/T-2 and CompM5/M5s models
Aimpoint Acro Locking Bar & Threaded Shaft | $35.95
A replacement locking bar and threaded shaft kit for Aimpoint Acro series sights.
- Fits Aimpoint Acro series sight models
- Replacement kit includes shaft and locking bar
Spuhr Aimpoint T-2 Magnifier Mount H57mm/2.25" Pic | $608.95
A robust, lightweight magnifier mount built for use with Aimpoint T-2 red dots and magnifiers.
- Height: 57mm / 2.25"
- Picatinny interface
- Hardcoat anodized finish for durability
Spuhr Picatinny Aesthetic Rings 30mm H19/0.75" | $234.95
Hunting series scope rings crafted for a secure, classic-look mounting solution.
- Fits 30mm tubes on Picatinny/Weaver bases
- Height: 19mm / 0.75"
- Weight: 83g / 2.9oz
- Classic top cover design
Spuhr Bubble Level Assembly | $131.95
An external bubble level assembly for mounting forward on a scope mount body or ring.
- Adjustable angle via two set screws
- Width: 29.5mm / Height: 41.6mm / Length: 32.1mm
- Weight: 20g / 0.7oz
- Includes screws
Spuhr Wilcox RAPTAR Adapter | $121.95
An interface for attaching a Wilcox RAPTAR, RAPTAR-S (Gen2), RAPTAR Lite ES, or SilencerCo RADIUS laser range finder to an ISMS scope mount.
- Height: 25mm / .984"
- Length: 85mm / 3.346" (Picatinny rail)
- Weight: 42g / 1.5oz
Spuhr Wilcox RAPTAR-S Adapter, Low | $121.95
The lowest-profile Spuhr interface for attaching Wilcox RAPTAR/RAPTAR-S laser range finders with Picatinny risers to an ISMS scope mount.
- Height: 14mm / .55"
- Length: 85mm / 3.35" (Picatinny rail)
- Weight: 31g / 1.1oz
- Includes screws
Spuhr Leveling Kit, Separate Rings | $52.95
A leveling kit for indexing the reticle to a Picatinny rail on Spuhr SR-series rings.
- Included with SR-series rings
- Not compatible with Weaver rails or ISMS unimounts/cantilever mounts
A spacer for the Spuhr Interface system.
- Height: 4mm / .157"
- Weight: 7g / 0.2oz
- Includes screws
A 4-pack of replacement clamping screws for the Picatinny side clamp on select Spuhr mounts.
- M5x25 Torx 20, Grade 10.9 steel
- Zinc-nickel treated for corrosion protection
- Pre-coated with Gleitmo 627 dry lubricant
- Includes SS washers
A Torx key sized for all screws in the Spuhr ISMS line.
- 45mm stem
An aluminum scope ring set built for reliability and affordability.
- 6061-T6 aircraft-grade aluminum construction
- Cushioned interior lining for scope contact
- Single cross-rail recoil lug
WWW.THEAMMOSOURCE.COM
