SFRC Pimped out shotguns
- Thread starter Chemist
- Start date
I think there is a market for massaged 870's from a great dealer. S&J should make up some custom Tactical Remington Express and better models with goddies already installed
at good prices. throwin a slicked up action too.
we need a Canadian version of Wilson combat and nighthawk type shotties.
you good even make a ZOMBIE version They would sell, COMBAT Version etc.. put some kick ass names on them and watch them sell.
Lots of people pay for the name. Tactical shotties are a hobbie for lots of people no real need for them but fun as hell.
All I ask is a free one for the great idea's
at good prices. throwin a slicked up action too.
we need a Canadian version of Wilson combat and nighthawk type shotties.
you good even make a ZOMBIE version They would sell, COMBAT Version etc.. put some kick ass names on them and watch them sell.
Lots of people pay for the name. Tactical shotties are a hobbie for lots of people no real need for them but fun as hell.
All I ask is a free one for the great idea's
you could do a build a bear type deal but with a shotgun. start with a basic 870 of choice Rem,Norc,Da etc. and have a few basic mods on it. Then have a kinds of parts and let the customer pick and choose what they would like. you assemble it and massage it and then ship out thier own custom shotgun. of course you would have to have you name on the reciever.
after building a few custom shotty's it would be nice to be able to get everything I need from one source done to my specs and save a few bucks at the same time.
after building a few custom shotty's it would be nice to be able to get everything I need from one source done to my specs and save a few bucks at the same time.
I half agree with Nisser... My suggestion would be this: Offer a "standard" model like you suggested above, giving the option between the Remington/DA. I suspect if they're well-built with decent components and priced reasonably (I'm sure you're well familiar with this), you'll have no trouble selling them.
However, for those of us who want something different, the "Build-A-Bear" concept suggested by Nisser is great, although I'd like to propose an amendment: To keep costs down, offer only a single receiver (like a Remington 870 Police Magnum or something) that's had the action cleaned up, with a few "basic" additions (jumbo safety, drilled and tapped, Duracoated/parkerized). That way, you don't have to work a new receiver every time someone orders a shotgun, but can just grab a pre-made one off the shelf... quicker turnaround and (hopefully) lower cost to the buyer. Then, offer some barrel and stock options, a few sights and rails, slings and mounts, chokes/door breachers, and shell-holders. I suspect you have most of this stuff kicking around anyway, and by limiting yourself to a single receiver you won't have to fiddle around with what works and what doesn't every time someone makes an order.
However, for those of us who want something different, the "Build-A-Bear" concept suggested by Nisser is great, although I'd like to propose an amendment: To keep costs down, offer only a single receiver (like a Remington 870 Police Magnum or something) that's had the action cleaned up, with a few "basic" additions (jumbo safety, drilled and tapped, Duracoated/parkerized). That way, you don't have to work a new receiver every time someone orders a shotgun, but can just grab a pre-made one off the shelf... quicker turnaround and (hopefully) lower cost to the buyer. Then, offer some barrel and stock options, a few sights and rails, slings and mounts, chokes/door breachers, and shell-holders. I suspect you have most of this stuff kicking around anyway, and by limiting yourself to a single receiver you won't have to fiddle around with what works and what doesn't every time someone makes an order.
These are some of the ones I'm looking at now. They will be built on a Remington 870 or Norinco NP1 with 18.5" barrel, 14" Norinco Barrel, or 12.5" DA barrel. Other sizes if available.
They can be built with the S&J, NEA or ATI stock adapter. Options will include sling mounts, followers, bayonet clamps, extensions, etc. I'll probably be able to offer barrel and chamber polishing.
DA Cougar, Ambi Sling Mount, S&J Follower, S&J Jumbo Safey, +1 Extension
Remington 870 Tactical, +2 extension, S&J Follower, S&J Jumbo Safety, option of bayonet clamp, ATI Stock
Remington 870 Tactical. As above but with S&J Stock adaptor
Remington 870 Tactical 14" Barrel (Norinco), Bobcat Forend, Light and clamp, +1 extension, S&J Jumbo Safey, S&J follower and single point sling mount . Will also be offered with standard foreend and the option of the S&J Stock Adaptor, NEA adaptor, or ATI Stock.
Remington 870 Tactical, +2 extension, S&J Jumbo Safety, NEA follower, NEA stock adapter and options for bayonet mount.
They can be built with the S&J, NEA or ATI stock adapter. Options will include sling mounts, followers, bayonet clamps, extensions, etc. I'll probably be able to offer barrel and chamber polishing.
DA Cougar, Ambi Sling Mount, S&J Follower, S&J Jumbo Safey, +1 Extension
Remington 870 Tactical, +2 extension, S&J Follower, S&J Jumbo Safety, option of bayonet clamp, ATI Stock
Remington 870 Tactical. As above but with S&J Stock adaptor
Remington 870 Tactical 14" Barrel (Norinco), Bobcat Forend, Light and clamp, +1 extension, S&J Jumbo Safey, S&J follower and single point sling mount . Will also be offered with standard foreend and the option of the S&J Stock Adaptor, NEA adaptor, or ATI Stock.
Remington 870 Tactical, +2 extension, S&J Jumbo Safety, NEA follower, NEA stock adapter and options for bayonet mount.
- Location
- East ontario
SFRC can do whatever you need need , have lots and lots of shotgun parts available for custom builds.
angrysoldier
CGN Ultra frequent flyer
- Location
- under your bed
i love the first one, how much? feel free to pm me if you want.
tommyguitar
CGN Regular
- Location
- West Kootenays
Love the "zombie" model shotty idea.
