Mumbles Marble Mouth
CGN Ultra frequent flyer
- Location
- Lower Mainland
Type 56 SKS
I finally got to get out and try out my new Type 56 SKS and new to me but heavily used SVT-40. The Type 56 I picked up from Frontier Firearms. Not sure if they have any left. Always wanted a Chinese SKS and I didn't mind paying the extra $70 more than a Russian SKS to get it.

It was advertised as non-refurbished military SKS. Its in very good shape. Not a scratch in the stock, bluing is mint, crown perfect, barrel 99.9%, and its from factory 0306. I went to sight the gun in today and it was shooting high but the windage was correct. Sighted it at 50 meters, then at 100 meters, then quickly realized that I had just sighted it in with the battle setting and not at 100 meters. Didn't bring enough ammunition to re-sight it again so I just ran it as is. Groupings are the typical 4" - 5" in size. The range only goes out to 200 meters however plinking with this SKS on several different steel targets makes me realize this SKS is surprisingly accurate. Out of 20 rounds, 4 were a miss. I could hit the steel turkey target at 200 meters pretty easily with this SKS although I don't promote using such rifle for actual turkey hunting.
50 meter sight in target

First 5 shot grouping at 100 meters
Not sure where the 5th shot went.

2nd 5 shot grouping at 100 meters.
3 grouped well, not sure why the other two hit down south at the other target.

After plinking 20 rounds 5 shot group
This was after firing 20 rounds of plinking at steel targets with a pretty hot barrel. Got another hit was down south.

Final Verdict
Very satisfied with the gun.
SVT-40
I picked this rifle up from Wholesale Sports last weekend while getting a crate of 7.62x54r and G96. You may of seen the, Just A Normal Canadian Shopping Day, thread I made when I got this rifle.

The rifle is a 1941 Izhevsk receiver built on almost all Tula parts. The only other parts on this rifle that is Izhevsk is the vented barrel shroud and the hammer. The rest is all Tula marked. The stock in in perfect shape. Like it looks new. I only wish the rest of the rifle looked as good as the stock. The bluing is well done but when you closely examine the gun, you can see it was heavily pitted at one point in its life. The barrel is in maybe 45% condition. Its pretty bad. I was concerned that the gun wouldn't shoot well but I was very surprised to see it shoots very well. The guns windage was right on but elevation was low. That's good because the SKS sight adjustment tool will work for elevation on this gun but not windage.
50 meters sight in target

100 meters sight in and groupings
The first 3 shots low are a 3 shot group I fired just to sight in the gun for 100 meters. The 3 shot group is really nice. Surprised me. The second 5 shots up high are after adjustments. I was also surprised. The 5th shot is being covered up by the receiver cover. Didn't mean to do that. The 4 shots that are there though measure 4 3/4"

Final Verdict
Very satisfied and surprised that a barrel as worn out as this one is still shooting well. This was the first time I ever used corrosive ammunition in an SVT-40. I intended to never do it to just always use non-corrosive MFS. The gun wouldn't cycle with gas setting 1.3 which I intentionally set it to at home to start it off at. When I originally dissembled this rifle to clean the cosmoline out, I couldn't help but notice the 1.5 gas setting hole was heavily corroded to the point that the hole is actually bigger than the 1.7 hole. The other gas setting holes had no indication that they were ever even used. When I noticed this, I decided to try the gun on 1.3 to see how it functions and it wouldn't. Once I turned it to 1.5, it functions very well. No failures. I'm assuming this gun, other than the receiver, was heavily used in WWII. All the Tula parts on this gun are heavily pitted while the 3 Izhevsk parts look new. The fact that the gun was heavily used, and that it still shoots well enough, makes the rifle all more interesting to me than my other SVT-40 which has a minty fresh looking barrel. Although my other SVT-40 shoots better than this one, I'm still like it a lot. I also plinked with this gun on the same targets as the SKS. Out of 15 shots used for plinking both 100 and 200 meters, 3 were misses. The turkey target is also not an issue to hit.

I finally got to get out and try out my new Type 56 SKS and new to me but heavily used SVT-40. The Type 56 I picked up from Frontier Firearms. Not sure if they have any left. Always wanted a Chinese SKS and I didn't mind paying the extra $70 more than a Russian SKS to get it.

It was advertised as non-refurbished military SKS. Its in very good shape. Not a scratch in the stock, bluing is mint, crown perfect, barrel 99.9%, and its from factory 0306. I went to sight the gun in today and it was shooting high but the windage was correct. Sighted it at 50 meters, then at 100 meters, then quickly realized that I had just sighted it in with the battle setting and not at 100 meters. Didn't bring enough ammunition to re-sight it again so I just ran it as is. Groupings are the typical 4" - 5" in size. The range only goes out to 200 meters however plinking with this SKS on several different steel targets makes me realize this SKS is surprisingly accurate. Out of 20 rounds, 4 were a miss. I could hit the steel turkey target at 200 meters pretty easily with this SKS although I don't promote using such rifle for actual turkey hunting.
50 meter sight in target

First 5 shot grouping at 100 meters
Not sure where the 5th shot went.

2nd 5 shot grouping at 100 meters.
3 grouped well, not sure why the other two hit down south at the other target.

After plinking 20 rounds 5 shot group
This was after firing 20 rounds of plinking at steel targets with a pretty hot barrel. Got another hit was down south.

Final Verdict
Very satisfied with the gun.
SVT-40
I picked this rifle up from Wholesale Sports last weekend while getting a crate of 7.62x54r and G96. You may of seen the, Just A Normal Canadian Shopping Day, thread I made when I got this rifle.

The rifle is a 1941 Izhevsk receiver built on almost all Tula parts. The only other parts on this rifle that is Izhevsk is the vented barrel shroud and the hammer. The rest is all Tula marked. The stock in in perfect shape. Like it looks new. I only wish the rest of the rifle looked as good as the stock. The bluing is well done but when you closely examine the gun, you can see it was heavily pitted at one point in its life. The barrel is in maybe 45% condition. Its pretty bad. I was concerned that the gun wouldn't shoot well but I was very surprised to see it shoots very well. The guns windage was right on but elevation was low. That's good because the SKS sight adjustment tool will work for elevation on this gun but not windage.
50 meters sight in target

100 meters sight in and groupings
The first 3 shots low are a 3 shot group I fired just to sight in the gun for 100 meters. The 3 shot group is really nice. Surprised me. The second 5 shots up high are after adjustments. I was also surprised. The 5th shot is being covered up by the receiver cover. Didn't mean to do that. The 4 shots that are there though measure 4 3/4"

Final Verdict
Very satisfied and surprised that a barrel as worn out as this one is still shooting well. This was the first time I ever used corrosive ammunition in an SVT-40. I intended to never do it to just always use non-corrosive MFS. The gun wouldn't cycle with gas setting 1.3 which I intentionally set it to at home to start it off at. When I originally dissembled this rifle to clean the cosmoline out, I couldn't help but notice the 1.5 gas setting hole was heavily corroded to the point that the hole is actually bigger than the 1.7 hole. The other gas setting holes had no indication that they were ever even used. When I noticed this, I decided to try the gun on 1.3 to see how it functions and it wouldn't. Once I turned it to 1.5, it functions very well. No failures. I'm assuming this gun, other than the receiver, was heavily used in WWII. All the Tula parts on this gun are heavily pitted while the 3 Izhevsk parts look new. The fact that the gun was heavily used, and that it still shoots well enough, makes the rifle all more interesting to me than my other SVT-40 which has a minty fresh looking barrel. Although my other SVT-40 shoots better than this one, I'm still like it a lot. I also plinked with this gun on the same targets as the SKS. Out of 15 shots used for plinking both 100 and 200 meters, 3 were misses. The turkey target is also not an issue to hit.





















































