Short barrel for 37

[a j cave]

Does anyone make a 12-15 in barrel for the Ithica 37?

 

[Leg]

Ithaca does. Don't believe that they're currently exportable from the US.

 

[a j cave]

May just cut at 18 1/2 or 19 & be done.

 

[smashwagon]

you can cut down your barrel to 12-15 inches as long as it dosen't go smaller then 27 inches in overall length of the gun

 

[gallen270]

you can cut down your barrel to 12-15 inches as long as it dosen't go smaller then 27 inches in overall length of the gun

no you cant, this is bad information and illegal. a shorter barrel is legal, but has to be produced that way, not cut.

 

[Eric_911]

you can cut down your barrel to 12-15 inches as long as it dosen't go smaller then 27 inches in overall length of the gun

Wrong. You need to bone up on your reading, specifically the criminal code of Canada

 

[Leg]

you can cut down your barrel to 12-15 inches as long as it dosen't go smaller then 27 inches in overall length of the gun

If you don't know what the f**k you're talking about then you shouldn't be giving advice that can land someone in jail.

Can't cut a pump action barrel below 18" and overall length must be greater than 26"

 

[sendmorebrains]

you can cut down your barrel to 12-15 inches as long as it dosen't go smaller then 27 inches in overall length of the gun

"The problem with quotes from the internet is it is hard to verify their authenticity"-- abraham lincoln..

LOL.

 

[Jack Brock]

I thought you just needed it varified

 

[mmattockx]

you can cut down your barrel to 12-15 inches as long as it dosen't go smaller then 27 inches in overall length of the gun

I thought you just needed it varified

From the criminal code:

“prohibited firearm” means

• (a) a handgun that
  • (i) has a barrel equal to or less than 105 mm in length, or
  • (ii) is designed or adapted to discharge a 25 or 32 calibre cartridge,
  but does not include any such handgun that is prescribed, where the handgun is for use in international sporting competitions governed by the rules of the International Shooting Union,
• (b) a firearm that is adapted from a rifle or shotgun, whether by sawing, cutting or any other alteration, and that, as so adapted,
  • (i) is less than 660 mm in length, or
  • (ii) is 660 mm or greater in length and has a barrel less than 457 mm in length,
• (c) an automatic firearm, whether or not it has been altered to discharge only one projectile with one pressure of the trigger, or
• (d) any firearm that is prescribed to be a prohibited firearm;

http://laws-lois.justice.gc.ca/eng/acts/C-46/page-40.html#h-38


Cutting ANY long gun barrel to less than 457mm (17.99") makes it a prohibited firearm, regardless of rimfire or centerfire, rifle or shotgun, semi-auto or manual action. Period.

A new barrel can be manufactured at less than 457mm and that is legal. Cutting it shorter is never legal for us peons.


Mark

 

[cantom]

you can cut down your barrel to 12-15 inches as long as it dosen't go smaller then 27 inches in overall length of the gun

Wrong wrong wrong...prohibited weapon.

 

[Blegend]

you can cut down your barrel to 12-15 inches as long as it dosen't go smaller then 27 inches in overall length of the gun

Sweet heavenly Jesus no doggy no. Baaaad advice

 

[sendmorebrains]

I thought you just needed it varified

They say its all in the little details.

Not worth it for in for a penny, in for a pound repercussions..

Wise up everyone or find out the hard way.

..