Show off your single shot 22s

Something a little low brow compared to the drooling caused by these guys.
Stevens Favorite, started life as a .25 rimfire. The bore was toasty so i installed a liner and made it a .22 rimfire, put on a Italian tang sight I had laying around.
Makes a nice little old school shooter
20180120_104538-1030x773_crop_1030x500.jpg
 

Attachments

  • 20180120_104538-1030x773_crop_1030x500.jpg
    20180120_104538-1030x773_crop_1030x500.jpg
    148.1 KB · Views: 430
How about this one. An old pre Savage Lakefield Mkl, I modified for my wife's nephews to shoot when they were small. They thought it was cool. I'm thinking I will sell it, somebody else probably has a kid that would like it. The nephews out grew it
20180120_104433-1030x773_crop_939x424.jpg
 

Attachments

  • 20180120_104433-1030x773_crop_939x424.jpg
    20180120_104433-1030x773_crop_939x424.jpg
    146.2 KB · Views: 413
Last edited:
The rear is a steel AL Freeland tube with no lenses. It has an adjustable aperture at the rear, and the mounts are external adjusting Unertl.... The tube is moves around in the same exact fashion as a vintage external adjustable scope. The front is just a large hooded globe that you swap out clear/colored discs with black rings.

AL Freeland sold his sight tubes with Unertl mounts.


IMG_20180120_121358.jpg

OMG nice setup !
 
Will try to add my first pic, this is my Lee Enfield C No.7 MK 1 Long Branch .22 made in 1945, bought it from my uncle in the late 70's and shot them in the Army, came with the transport box as well and surprisingly accurate. Also have a very old single shot .22 made by Anschutz in the 1920's that was the farm gun my dad started with and the first .22 I fired. Will get a pic of it soon but in rough shape, firing pin repaired by my uncle and stock repainted.

No luck with the pics, have to find something other than Photobucket now.
 
Last edited:
Well played but unfortunately wrong answers.

Ok enough of mystery...

Its a Feinwerkbau Modell 2000. There is really not much infos about these rifles on the net.
I think they ended the production of this model around 1988 and they were selling for around 13-1400$.
Even on Google, there is only a couple and they don't wear the same stock as mine and they also don't have the gold engravings.
My guess would be a special run, honestly I don't know. My friend, who owned it for many years don't know more about this rifle.
Maybe I could send an email to Feinwerkbau and see if they have infos about this rifle,

Enough talking, pics will talk by themself...

lZze1kY.jpg


PDusJ4N.png


Q4J7NoQ.png


z0cCsJS.jpg


Di2BL1j.png


84C72WY.png


NZZeGKL.png


EN8RLGU.png


ymV29E8.png


Do I need to say that the trigger ( 2 stage ) on this thing is simply outstanding !

spR9m9B.png


Z30oV8c.png


T3TxtHS.png


YKHs9mo.png


7UQIgLv.png


xhc1U08.png


Very nice rifle you have there Ben. These are not very common here since Feinwerkbau is mainly a airguns manufacturer. They did however diversified into small-bore rifles in the late 70's. The goal was to provide airguns and cartridge rifles with the same stock design to satisfy multi-discipline marksmen.

Their first small-bore cartridge rifle was the M2000 ISU Standard commonly known as the UIT Standard. Chambered for the .22LR cartridge it was 44.1" long, had a 26.35" barrel with 4-groove rifling and weighted 10.8lb with the micro-adjustable aperture rear and replacement-element tunnel front sights. The original stock design was based, and nearly identical to the LG300S Match L air rifle.

Now, what you have is the M2000 Junior. The M2000 Junior was a short-barreled lightweight version of the ISU Standard model. Yours was manufactured in 1979 (these were proofed by the same house with the same codes as Heckler & Koch firearms) and has the pre-1985 stepped underside to the forend, starting in 1985 the stock reverted to a short but straight design just before the introduction of the 2600 series in 1986-87. The M2000 Junior is 39.5" long and has a 22.05" lighter weight barrel, weight is 9.25lb with sights. These were manufactured for young competitors (under 14yrs old) that needed shorter and lighter rifles.

Both of these models have a fixed comb. Models with an adjustable comb were the M2000 ISU Universal and M2000 ISU Moving Target commonly known as "Modell UIT Laufende Scheibe" in Germany.

I've recently seen an example of the M2000 UIT Standard in Europe, it was priced at 450 euros in excellent condition complete with factory sights.

If you need more info, let me know.

Feinwerkbau_Modell_2000_UIT_UIT_Junior.jpg
 
Very nice rifle you have there Ben. These are not very common here since Feinwerkbau is mainly a airguns manufacturer. They did however diversified into small-bore rifles in the late 70's. The goal was to provide airguns and cartridge rifles with the same stock design to satisfy multi-discipline marksmen.

Their first small-bore cartridge rifle was the M2000 ISU Standard commonly known as the UIT Standard. Chambered for the .22LR cartridge it was 44.1" long, had a 26.35" barrel with 4-groove rifling and weighted 10.8lb with the micro-adjustable aperture rear and replacement-element tunnel front sights. The original stock design was based, and nearly identical to the LG300S Match L air rifle.

Now, what you have is the M2000 Junior. The M2000 Junior was a short-barreled lightweight version of the ISU Standard model. Yours was manufactured in 1979 (these were proofed by the same house with the same codes as Heckler & Koch firearms) and has the pre-1985 stepped underside to the forend, starting in 1985 the stock reverted to a short but straight design just before the introduction of the 2600 series in 1986-87. The M2000 Junior is 39.5" long and has a 22.05" lighter weight barrel, weight is 9.25lb with sights. These were manufactured for young competitors (under 14yrs old) that needed shorter and lighter rifles.

Both of these models have a fixed comb. Models with an adjustable comb were the M2000 ISU Universal and M2000 ISU Moving Target commonly known as "Modell UIT Laufende Scheibe" in Germany.

I've recently seen an example of the M2000 UIT Standard in Europe, it was priced at 450 euros in excellent condition complete with factory sights.

If you need more info, let me know.

Very interesting infos, thanks.
From the dimensions, it seems right. Around 39 inch long and with a 22 inch barrel.

But the barrel on mine is a straight heavy barrel. The one on the pic looks to have a lightweight taper barrel.

The length of pull is an inch shorter than my Anschutz 64 MSR.
 
Well, here in UK I have -

1912 BSA Model 2 takedown by Alexander Martin of Glasgow - cased with all original accessories - probably the only one in existence.
Walther Sport bolt-action/semi-auto with original scope from 1930 - my dad's, bought in 1930. I've included this here because I was taught to shoot using it as a single shot b/a.
Mauser ES350B with Ajack x2.5 scope from 1937.
Walther DSM from 1937, sadly bubba'ed in the late 50's
BSA Martini MkII Intl from 1957 - true left-hand action and stock, with x18 Unertl Super target, and Al Freeland tube sights [not fitted, obvioulsy]. I paid £55 for it [excluding the Unertl] about fifteen years ago.
BSA Martini MkII Intl right-hand from 1962 with one-off laminated prone stock and Tasco x16 Model 707 scope.
Anschutz Model 1409 with thumbhole prone stock and adjustable hook butt-plate with Tasco x18 Model 707 scope - gun club scrap pile refugee that I paid £25 for.

tac
 
A new addition to my stable: A Remington 40X that I imported from the US. It arrived this week and is in great shape. Since I took those pics, I added an all steel rail and a Sightron SIII 10X50X60

Gilbert



 
Remington Target Master 41, this has a very cool bolt, stock needs refinishing but it could be a very nice gun.

and a little Cooey single shot.

27971738_10157230753994546_629216032640936751_n.jpg
28056238_10157230753944546_2712561953019323665_n.jpg
28167361_10157230754124546_4761470549857217017_n.jpg
 

Attachments

  • 27971738_10157230753994546_629216032640936751_n.jpg
    27971738_10157230753994546_629216032640936751_n.jpg
    41.5 KB · Views: 279
  • 28056238_10157230753944546_2712561953019323665_n.jpg
    28056238_10157230753944546_2712561953019323665_n.jpg
    45.6 KB · Views: 278
  • 28167361_10157230754124546_4761470549857217017_n.jpg
    28167361_10157230754124546_4761470549857217017_n.jpg
    34.7 KB · Views: 279
Something a little low brow compared to the drooling caused by these guys.
Stevens Favorite, started life as a .25 rimfire. The bore was toasty so i installed a liner and made it a .22 rimfire, put on a Italian tang sight I had laying around.
Makes a nice little old school shooter
View attachment 145774

I really like that with the tang sight. Mine could use a liner too...
 
Back
Top Bottom