Sig 226/227/229 SRT on Norinco NP34

[edojan]

has anyone installed this SRT kit on NP34 ? I wonder if this would work?
Sig Sauer SRT Short Reset Trigger Parts Kit, 226/227/229

https://rdsc.ca/sig-sauer-srt-short-reset-trigger-parts-kit-226-227-229/dp/3193

 

[randyhub]

Yeah I did, works fine, trigger feels much better.

 

[romurra]

Did on mine, works fine, trigger much improved. Mine is an np22.

 

[edojan]

just to clarify my original question which was somewhat ambiguous because I asked about both NP22 and NP34 (I have since edited the header). I only have model NP34. Will this kit work for NP34?

 

[reefer]

Interesting. Randy did you diy or have it done at the csc? I have a np34 as well and would like to upgrade it with the srt.

 

[randyhub]

Yes it worked on my NP34 and will work on the NP22.

Hi reefer, I had a a good friend on mine do the kit for me.

Thanks
Randy

 

[romurra]

I installed myself. It was a bit fiddlely, but not hard.

 

[edojan]

Yes it worked on my NP34 and will work on the NP22.

Hi reefer, I had a a good friend on mine do the kit for me.

Thanks
Randy

Great! Thank you.

 

[reefer]

Yes it worked on my NP34 and will work on the NP22.

Hi reefer, I had a a good friend on mine do the kit for me.

Thanks
Randy

Thank you Randy

 

[randyhub]

Most welcome.

 

[red_bailey]

For those looking to further tune their Norinco P-series copies, I have wondered if the hammer spring is the long old style (with the retaining clip) or the newer* shorter type (on the plastic base)? I would wager on the old, since they apparently have cloned the old style of slide and such.

Just for anybody who's looking to order a spring kit from Wolff.

* The newest (E2 Grip hammer strut) is out of the question, I'm sure.

 

[Darrellneil]

Sorry to butt into your thread but I too was wondering the same thing about putting it in my norinco np22 (p226 clone) will it work ??

 

[reefer]

I installed myself. It was a bit fiddlely, but not hard.

I got my SRT on the weekend and installed it today. You're right about it being a little fiddley to install but only took a few minutes. Feels great just dry firing, can't wait to get it to the range!

 

[cyclops666]

Tagged

 

[blitz2377]

For those looking to further tune their Norinco P-series copies, I have wondered if the hammer spring is the long old style (with the retaining clip) or the newer* shorter type (on the plastic base)? I would wager on the old, since they apparently have cloned the old style of slide and such.

Just for anybody who's looking to order a spring kit from Wolff.

* The newest (E2 Grip hammer strut) is out of the question, I'm sure.

E2 kit works with np22. In my case the grips needs a little bit of fitting due to the home is slightly mismatch.

If you're buying new spring, it will need the old style. The one with metal spring foot. The e2 kit has plastic foot.