Sig P226 Caliber 9mm X-change Kits and .357 Sig barrels?

[fmarcano]

MD Charlton
Are you expecting to receive P226 Caliber X-change kits to switch to 9MM? Are you also planning to receive P226 .357 sig barrels?

Thanks!

 

[MD Charlton]

Good afternoon,

We just received the caliber exchange kits; they are shipping to dealers this week.

As for the 3578 barrel, we have them on order - should be here in six to eight weeks.

MDC

 

[MK18]

Besides warranty do you also do SRT (Short Reset Trigger) install?

 

[MD Charlton]

Besides warranty do you also do SRT (Short Reset Trigger) install?

Yes we do; please email sigrepairs@mdcharlton.ca for this service.

MDC

 

[TimberWolf_3063]

While we're on the subject of SIG barrels...can you get the Barrel, P226, 9mm, 126mm, Chrome/Phosphate, Threaded? And what would the price be? Also, any military discount?

 

[fmarcano]

What dealers in Ontario are getting the 9mm Kit?

 

[Oddjob70]

What dealers in Alberta (Edmonton area) are receiving the exchange kits please?

 

[fmarcano]

MD Charlton
Any news about the 9mm caliber x-change kit for the P226? I have called two dealers and none of them have received a response

 

[Recce guy01]

Tagging for follow up! I've been trying to find a 9mm kit for a while!!

 

[pavelhom]

Tagging for follow up! I've been trying to find a 9mm kit for a while!!

Tagged as well!

 

[Mik123]

Tagged

 

[fmarcano]

MD Charlton
Any news? Called 3 dealers and same response "the distributor does not have it"

 

[Brettzky]

doesn't the .357 Sig kit require a different spring as well?
regardless, I want one too so please post or pm when they come in stock. thanks.

 

[fmarcano]

If your sig is .40S&W, you just need to switch the barrel to .357 sig, the rest of the parts work. If your Sig is 9 mm, you need the whole caliber X-change kit for .357 sig.

Due to the lack of response from MD Charlton, i went ahead and bought a CZ 75 SP01 Shadow 9 mm this last Saturday. So, I now have my Sig .40 and the CZ in 9 mm.

 

[Skyllz]

Tagged for interest... I have a 22lr p226 and i'd love a 9mm kit.

 

[MD Charlton]

Hey Guys,

Sorry for our delay responding to this thread.

While we're on the subject of SIG barrels...can you get the Barrel, P226, 9mm, 126mm, Chrome/Phosphate, Threaded? And what would the price be? Also, any military discount?

We are able to order this barrel - the retail price will be around $275. Please ensure you specify the Combat barrel to the dealer when placing your order. The IOP discount applies to firearms only.

doesn't the .357 Sig kit require a different spring as well?
regardless, I want one too so please post or pm when they come in stock. thanks.

See answer below:

If your sig is .40S&W, you just need to switch the barrel to .357 sig, the rest of the parts work. If your Sig is 9 mm, you need the whole caliber X-change kit for .357 sig.

Due to the lack of response from MD Charlton, i went ahead and bought a CZ 75 SP01 Shadow 9 mm this last Saturday. So, I now have my Sig .40 and the CZ in 9 mm.

The technical info here is correct.

Again, we apologize for our delay responding here. On a more positive note, enjoy your new SP01!

Regards,
MDC

 

[Ruutzy]

Tagged, also hoping for a 9mm kit.

 

[Recce guy01]

So, will any of these kits be entering Canada at any time? There are none to be found anywhere at the moment and in the 2015 Sig Sauer catalogue, there is no mention of the center-fire kits (only .22lr)!

 

[Smitsauce]

Just picked up a 229 in .22lr and was wondering if you got in any X-Change kits to convert it into 9mm? Preferably with the full length slide and barrel, not the short slide and threaded barrel that sticks out to conform to Canadian barrel length.

If you did get them in, can you let me know what dealers they were sent to?

Thanks,

Ian

 

[fmarcano]

any news on the P226 9 mm x-change kits?