Sig P250 9mm- Questions and opinions

Alfonso

Alfonso

CGN Regular
Rating - 100%
53   0   0
Location
Okanagan
Just picked up a semi used Sig P250 full frame in 9mm. I've heard good things. If you own one tell me what you think. I paid $350 and used once at the range. Also has night sights. Would like to convert to .40S&W eventually. Modular aspect was one factor that I like. Where can one buy the conversion kits? Thanks

Alfonso
 
Last edited:
I have one, It shoots great. No failures to feed or fire so far. Pretty accurate once you learn to handle it steady during the trigger pull.

Not sure about Conversion kits, but the price of the conversion kit will be close to the the price of the gun :)

I did change the recoil guide rod and spring on mine. The stock one is plastic, weak material, I installed solid stainless steel one from an USA seller. Flat shipping 10$ to canada, no additional fees.

I got the rod and spring from this place : http://shop.springerprecision.com/product.sc?productId=306&categoryId=56

DA pull is the best I have tried so far, smooth and not heavy. It is just long.

It is a great DAO pistol in my view. Very reliable so far, easy to disasemble and clean.
 
Last edited:
mtstef said:
I have one, It shoots great. No failures to feed or fire so far. Pretty accurate once you learn to handle it steady during the trigger pull.

Not sure about Conversion kits, but the price of the conversion kit will be close to the the price of the gun :)

I did change the recoil guide rod and spring on mine. The stock one is plastic, weak material, I installed solid stainless steel one from an USA seller. Flat shipping 10$ to canada, no additional fees.

I got the rod and spring from this place : http://shop.springerprecision.com/product.sc?productId=306&categoryId=56

DA pull is the best I have tried so far, smooth and not heavy. It is just long.

It is a great DAO pistol in my view. Very reliable so far, easy to disasemble and clean.
Click to expand...


What spring weight did you try when you ordered the stainless steel rod?
 
this is what they recommended :
--------
I was going to put a 16# spring in but I can make it 18#. If you are shooting 9mm I would probably just stick with the 16# and if you are shooting 40 I'd say a 17# would be good.
---------

I was initially with impression I got 18#, but It seems to be 16# on a second read :)
 
Last edited:
found the original label from the package of the spring :

20431631_1118866568257097_4396918464055893012_n.jpg


20414015_1116644495145971_5105479675897957825_o.jpg


20429847_1116644491812638_1626904434835010349_n.jpg


20265046_1116644708479283_5956867522849818992_n.jpg


20294574_1116644638479290_431312308054696813_n.jpg
 
Last edited:
mtstef Great thanks for letting us know it's a 16 spring might be time for me to order a new guide and spring.
 
You must log in or register to reply here.
Back
Top Bottom