SIG X5 Legion p320 red dot fit Nikon Spur

s2000ron

s2000ron

Regular
Rating - 99.2%
122   1   0
Location
Canada
fyi I had this red dot previously on my regular X5 but it also fit my Legion wow
just need to find 2 small screws that fit the slide I found them on a old weaver scope rings lol
so here some pics

48ED8FCE-6751-4C48-B305-F4C2FB8B510C.jpg1C256C8D-6B44-4E69-8CED-C54E3605D537.jpg1F7B3476-7A4A-4BC4-BED3-37065AB4668E.jpg
 

Attachments

  • 48ED8FCE-6751-4C48-B305-F4C2FB8B510C.jpg
    48ED8FCE-6751-4C48-B305-F4C2FB8B510C.jpg
    146.4 KB · Views: 278
  • 1C256C8D-6B44-4E69-8CED-C54E3605D537.jpg
    1C256C8D-6B44-4E69-8CED-C54E3605D537.jpg
    88.3 KB · Views: 275
  • 1F7B3476-7A4A-4BC4-BED3-37065AB4668E.jpg
    1F7B3476-7A4A-4BC4-BED3-37065AB4668E.jpg
    45.2 KB · Views: 273
Looks great, did you upgrade your trigger and mag release if so what products and how do you like? Did you also get the non-LCI barrel? I already have the gas pedal on mine. Really enjoy shooting it!
Thanks for sharing
 
what’s the non LCI barrel!?link or explain?

trigger is a Keres adjustable trigger is sweet and almost feels like my Tanfoglio or cz shadow 2
mag release is from springer precision they ship to Canada
Factionrr : and on lever its a “Gas Pedal for P320 “ you can google it
 
s2000ron said:
what’s the non LCI barrel!?link or explain?

trigger is a Keres adjustable trigger is sweet and almost feels like my Tanfoglio or cz shadow 2
mag release is from springer precision they ship to Canada
Factionrr : and on lever its a “Gas Pedal for P320 “ you can google it
Click to expand...

Found it sir. Thank you for the info.
 
s2000ron said:
what’s the non LCI barrel!?link or explain?

trigger is a Keres adjustable trigger is sweet and almost feels like my Tanfoglio or cz shadow 2
mag release is from springer precision they ship to Canada
Factionrr : and on lever its a “Gas Pedal for P320 “ you can google it
Click to expand...

The non-LCI (loaded chamber indicator) barrel is one that you can get swapped out by MD Charleton at no cost (except shipping one way). This barrel does not have the small cutout to see if there is a round chambered. Owners were concerned that with an optic on that the extra blowback from the LCI was dirtying the optic quickly. I have got the updated barrel but no optic yet. If you need info let me know.
How much lighter is the upgraded trigger? I currently think the factory one is pretty good but could be a future upgrade.

Doug
 
Doug mine has the non LCI here a picture is that it ?..
I have the springs and sear from Grayguns trigger that I installed on my previously reg.X5 and then I replaced the GG trigger to the Keres trig. for short reset and almost no pre-travel
I’m about
Give your email in PV I will send you a video of the trigger in action

ROn
584F27FC-DADF-47E9-8698-53DA73A75D35.jpg
 

Attachments

  • 584F27FC-DADF-47E9-8698-53DA73A75D35.jpg
    584F27FC-DADF-47E9-8698-53DA73A75D35.jpg
    60.8 KB · Views: 247
Recently contacted MD Charlton for the LCI barrel swap and this is what they replied "As for the barrel swap it is not being offered anymore as it was just done with some spare barrels we had lying around.
However we can sell you a barrel through your preferred dealer if you would like"
Sucks cause I installed an optic and noticed the dirt on the lenses after the first trip to the range.
 
If you are going to post pictures direct here, which I have, you have to buy a membership for 25.oo , which I find a great deal, as I can't get along with picture hosting stuff, banners, crap and ads I don't need.
DDT414 said:
No you do not have the non-LCI barrel. For some reason I can't post attachments (too low of a post count?)
I will send you a PM with my email.
Click to expand...
 
You must log in or register to reply here.
Back
Top Bottom