338 Imperial
CGN Regular
- Location
- Chetwynd BC
So I've cast 4 pails of 240gn swc boolets (Llyman Mold ) for my S&W 629 44 mag. Had planed on tumble lubing.
A friend loaned me his lube/sizer , a Star Machine Works with a .4325 die.
My bullets pass through with only the spru end barely sizing...this seems large to me..?
I measured the front of the cylinder on the 629 @ .4335 and of course the bullets pass through fine.
Do I need to slug the bore ? Am I concerned over nothing ? Or will I have leading issues ?
What's your thoughts..
A friend loaned me his lube/sizer , a Star Machine Works with a .4325 die.
My bullets pass through with only the spru end barely sizing...this seems large to me..?
I measured the front of the cylinder on the 629 @ .4335 and of course the bullets pass through fine.
Do I need to slug the bore ? Am I concerned over nothing ? Or will I have leading issues ?
What's your thoughts..