how to clean an sks mag
1 look at your mag, it is basicly made of 3 parts, the frame, the follower and the floor plate
2 all 3 parts and bond together by a cross pin, removing it will allow you to clean your mag and remove all the factory grease and carbon fouling.
3 beware of the spring, not that it will jump off and you will loose it but is very important to reassemble it as it was when you unscrewed it or you could have issues with some people.
4 put back the cross pin or another one to bond the 3 parts togeter, it must now be too tight or the mag wont work properly, i recomand using the factory one
5 put it back on the gun and enjoy your clean mag, works better than a dirty one. feed cartridges faster
i enjoy cleaning my mags, it allow my rifle to have a clean, neat and break free action
if you have any questions about how to clean a mag, weather, rifle, shotgun tube or any other kind of mag, just ask,
and remember, a clean mag allow your gun to works better and increase it's lifetime