HammerHand
Regular
- Location
- Ontario, Canada
I used WD40 to take off the little bit of cosmoline that was left on my SKS. Worked pretty well. Still a few areas with a bit of hard tarlike stuff - probably going to need to use brake cleaner of something to get it off.
I went beyond the field strip and took it completely apart. I took an Xacto knife and some 150 grit sandpaper, reshaped the cutout above the trigger guard and took some of the rough edges off the upper handguard. Still need to work on some of the other rough cuts on the stock. I plan on stripping the finish on the stock, taking out as many dents as I can, and refinishing it with tung oil.
Anybody know if the stock's got a lacquer finish or something else? I want to strip the finish without sanding.
I went beyond the field strip and took it completely apart. I took an Xacto knife and some 150 grit sandpaper, reshaped the cutout above the trigger guard and took some of the rough edges off the upper handguard. Still need to work on some of the other rough cuts on the stock. I plan on stripping the finish on the stock, taking out as many dents as I can, and refinishing it with tung oil.
Anybody know if the stock's got a lacquer finish or something else? I want to strip the finish without sanding.




















































