Smith and Wesson M&P 2.0 compact.
- Thread starter Gundoggy
- Start date
personaguru
Regular
- Location
- grand-digue NB
++1
You can order them off the site. Here is the link
http://www.irunguns.com/category.semi-automatic-handguns?filter_brand=308
Here is the link to the barrel you will need should you purchase a 9MM
http://www.irunguns.com/product.storm-sw-mp-comp-9mm-428-threaded
http://www.irunguns.com/category.semi-automatic-handguns?filter_brand=308
Here is the link to the barrel you will need should you purchase a 9MM
http://www.irunguns.com/product.storm-sw-mp-comp-9mm-428-threaded
So would a 4.25" M&P 9 2.0 barrel be operational in a compact?
And if so can you get factory 4.25 barrels?
like this
http://www.irunguns.com/product.storm-sw-mp-9mm-425-ss-match
And if so can you get factory 4.25 barrels?
like this
http://www.irunguns.com/product.storm-sw-mp-9mm-425-ss-match
Last edited:
So I reached out to Storm Lake about using that barrel in the 2.0 compact. The only response I recieved was a blunt
"No we do not have a barrel that will work in the compact 2.0 smith."
Also after looking at specs for threaded barrels centerfire are generally threaded for a length of 0.60" and rimfire for 0.40". So assuming a barrel length of 4.28" that means either the threads do not clear the slide itself or the barrel length is measured to the start of the threads and will have 0.28" protruding before the threads start, probably affecting the cycling.
I also reached out to Apex, they make a 4.0" that was released 2 days ago but nothing mentioned yet for a threaded barrel. I assume they will make one but time will tell. I am told the tolerances between the 1.0 and 2.0 are slight and may require additional fitting compared to the 1.0. I also asked about using a 4.25" 2.0 barrel in the compact and I was told it would not work due to lock up issues.
As of right now the only company I see making a longer/threaded barrel specifically for the m&p 2.0 compact is blacklistind.com.
Will you guys bring in barrels specifically for the compact when available?
I am a little leary as to using a barrel not designed for the 2.0 compact.
I would hate to buy these 2 items only to have a gun that malfunctions all the time when firing or worse isnt safe to fire.
"No we do not have a barrel that will work in the compact 2.0 smith."
Also after looking at specs for threaded barrels centerfire are generally threaded for a length of 0.60" and rimfire for 0.40". So assuming a barrel length of 4.28" that means either the threads do not clear the slide itself or the barrel length is measured to the start of the threads and will have 0.28" protruding before the threads start, probably affecting the cycling.
I also reached out to Apex, they make a 4.0" that was released 2 days ago but nothing mentioned yet for a threaded barrel. I assume they will make one but time will tell. I am told the tolerances between the 1.0 and 2.0 are slight and may require additional fitting compared to the 1.0. I also asked about using a 4.25" 2.0 barrel in the compact and I was told it would not work due to lock up issues.
As of right now the only company I see making a longer/threaded barrel specifically for the m&p 2.0 compact is blacklistind.com.
Will you guys bring in barrels specifically for the compact when available?
I am a little leary as to using a barrel not designed for the 2.0 compact.
I would hate to buy these 2 items only to have a gun that malfunctions all the time when firing or worse isnt safe to fire.
Last edited:
This.
I would much rather have a non threaded 106mm or 4.25" barrel that is actually manufactured for the 2.0 compact.
Let us know
