Smoke Grenades w/ Flat Rate Shipping!

Wolverine .303

Wolverine .303

Business Member Rep
Location
Lattitude - 49.89617 | Longitude - 100.85384
e7899e2550a3ae099aa0b42d5d6ffb18.gif



Enola ###e is once again rocking and rolling with Wolverine Supplies! We have been able to revamp a few things with Enola ###e and can offer standard shipping on them ( $15.00 ), and they also qualify for our FREE2SHIP promotion! Any purchase over $300.00 of grenades and you can apply the FREE2SHIP promo! Check them all out at the link below! As always:

You can E-mail us at: sales@wolverinesupplies.com

You can Call us at: 204-748-2454

You can send at letter to: Box 729 , #1 River Valley Road, Virden, MB, R0M 2C0 , Canada

You can send a messenger to : Lattitude#49.89617 | Longitude -100.85384 NE ¼ 5-11-25


Link to the Website --> https://www.wolverinesupplies.com/SearchByKeyword?word=ENOLA%20GAYE#?sortValue=0&currentPage=2

IdBySmA.jpg
 
Ryang5177 said:
Any product we can slap on one of the NR black rifles to launch these? Obviously keeping it NR is the purpose here.
Click to expand...

The airsoft 40mm C02 launchers work, I’m not sure on the diameter of the new ones, the old style ones fit into the Ball/powder style launch shells nice tight fit... could get them about 50y-100y.

They have stand alone launchers and under rail attached launchers, the higher end ones will hold up to recoil.

Also the Blank fire thread on muzzle devise for launching pop cans would probably work as well.
 
J.Hancock said:
What is the expected shelf life for these? (storage longevity)
Click to expand...
From the manufacturer:

EG said:
If you are a regular user of our smoke grenade products you may have noticed an update on the cap which is a date stamp showing the date of manufacture. Currently we do not have an expiry date on our products, they should be good to use years after purchase, in fact we believe they may get better with age.
Click to expand...

I lit off some WP40 model ones last year (pic below) that were in their original shrink wrap from Dec 2015 and they worked good as new, so I would say at least 4 years. If you plan on storing them for a long time I would check that the shrink wrap (under the protective cap/over the vent hole) is in good condition. If not I would replace it with clear packing tape. WP40/wire pull model smokes have a single velt hole, "burst"/twin vent smokes have two.

At 5 mins 53 seconds in THIS VIDEO you can see damaged shrink wrap. To fix it you remove the existing damaged shrink wrap and carefully remove the cardboard EG logo disc (it's stuck down with a single drop of glue only in one spot). Shake the smoke upside down to remove any dust/loose powder from the inside. Clean the cardboard disc and lip of the smoke so they are free from dust (just wipe them off). Apply a very thin coat of wood glue around the lip of the smoke and press the cardboard disc back into place. It helps to place something heavy on it while the glue dries (dictionary works well). Once the glue is dry cover the cardboard disc with packing tape then using an xacto knife or scissors trim the tape to match the round shape of the smoke.

Happy Family Day and safe smoking!

iGNxU0.png
 
You must log in or register to reply here.
Back
Top Bottom