so called powder puff loads for ppc and ipsc?

WestIslandRifle

WestIslandRifle

CGN frequent flyer
Rating - 99.2%
131   1   1
Location
QUEBEKISTAN, Canada
kind of at a cross road . im not sure if i want to shoot factory loads or creat my own ''powder puff''' loads and does anyone have any ideas how to still meet power factors if i do i will shoot production 9mm out of a XD9 5'' barrel





:kickInTheNuts:
 
3.1 gr VV N320 with a 147 gr lead RN at OAL 1.130 make 130 in my Tanfoglio Match..

If you use plated bullets you need to boost the powder to 3.2-3.3 depending on your barrel...

RDG
 
rdgietz said:
3.1 gr VV N320 with a 147 gr lead RN at OAL 1.130 make 130 in my Tanfoglio Match..

If you use plated bullets you need to boost the powder to 3.2-3.3 depending on your barrel...

RDG
Click to expand...

where are you getting the 147 gr lead? i cant find anything over 124

edit: i havent ran it over a chrono since im shooting exclusively steel challenge right now, but i do 3.2 gr tite group and a 147 berrys in my m&p pro, common load i was told people used in their m&p for competition so im pretty confident it will make pf when i get around to chronoing it
 
Buy a chrony. Data you get elsewhere is nice to have as a reference. You need to know what your gun and ammo are doing, not just guess.
 
heavenIsAlie said:
where are you getting the 147 gr lead? i cant find anything over 124

edit: i havent ran it over a chrono since im shooting exclusively steel challenge right now, but i do 3.2 gr tite group and a 147 berrys in my m&p pro, common load i was told people used in their m&p for competition so im pretty confident it will make pf when i get around to chronoing it
Click to expand...

I get the 147 grain RN from Cactus Plains bullets.. I think they are in Saskatchewan... but i just get them from a guy at our club who brings them in for us... They shoot really well out of my Tanfoglio Match..

I have chronied them and they do make 132 PF...

RDG
 
You must log in or register to reply here.
Back
Top Bottom