SOLVED, Sending back

[MuthaFunk]

Anyone know anywhere to purchase a SKS trigger?

If your not handy with tools you should just send it to a smith to be corrected. If you want I could do it for you but I'm in Ontario. PM me if that intersts you.

To answer your question Numrich gun parts will have trigger parts and possibly a whole assembly although I think they were sold out of entire assemblies the last time I checked.

 

[negativejeff]

Read post #1 completely.

My bad I missed that.

 

[Rifter]

If your not handy with tools you should just send it to a smith to be corrected. If you want I could do it for you but I'm in Ontario. PM me if that intersts you.

To answer your question Numrich gun parts will have trigger parts and possibly a whole assembly although I think they were sold out of entire assemblies the last time I checked.

I'm pretty handy and have watched some very informative YouTube videos on how to do it.

I'm going to give it a shot before pulling the pin on buying another trigger, really I have nothing to lose by trying as it's not useable now anyways.

 

[Emmer]

If your sear mag release spring is weak the shock of the carrier moving forward can knock the sear out from under the hammer. It could be a few other things though. A really bad negative sear engagement could also cause this.

sear spring is weak or tampered with causing a malfunction.

 

[safehunter]

Two solutions that only require $$$
http://www.murraysguns.com/922r.htm
http://www.kivaari.com/SKS Target Match.htm

But really you should save your money and read, especially
http://yooperj.com/SKS-25.htm
http://sailorcurt.com/category/sks/

I think even iraqveteran8888 has a tube video on this.

If it's about springs I highly recommend Wolff springs. I put them on and got a much nicer trigger. I think hi cal has them. Probably other venders. Murray's guns too

 

[Emmer]

Lever arms in Vancouver used to sell SKS parts, prolly still do, I haven't been there for a while.

 

[stripperclipper]

were you using old surplus ammo, or new commercial stuff?
"They" say the primers are softer on the commercial stuff, and its more prone to slam firing than surplus.

 

[Rifter]

were you using old surplus ammo, or new commercial stuff?
"They" say the primers are softer on the commercial stuff, and its more prone to slam firing than surplus.

It was Czech surplus.

Also seller may replace it so might be sending rifle back.

 

[RickR1100]

Yea I think Lever Arms in Vancouver still sells sks parts.

You can also try the EE here under Surplus Parts... I think there was one there in the last two weeks... maybe. It probably already sold, but worth combing through. Also you could post a WTB "Want to buy" asking for that. Someone may have a "parts gun" already partly torn down.

 

[AaronGer]

Now we are going to to have problems with all SKS. I always was wonder what will be the reason for RCMP to prohibit SKS. The answer is easy - people who use them.

Really? The OP is doing the smart thing by asking for help trying to track down an actual problem. How is any of that relevant or accurate in any way?

To the op sounds like you got the advice you needed.

 

[Kayser Sose]

how is this against rules? It is currently operating in an automatic manner, you would think from the OP that you would have figured out i am aware its not supposed to and it malfunctioning.

Don't know if this has been covered;

It's not operating, it's malfunctioning. Now get it fixed if you can't sort it out yourself. ASAP, IMHO.

It's actually a very simple machine, there's no magic here my friend

 

[Rifter]

I'm for sure sending it back. Thanks to those who replied with useful Information.

 

[skneub]

I'm for sure sending it back. Thanks to those who replied with useful Information.

Cool because it is broken , or worn out

 

[tinviper]

If in doubt you can try someone known as a gunsmith!

 

[steamy teabag]

Lol there would be so much uproar and so many people effected it would make the Swiss arms and 858 look like a joke.

I don't think they would care.

 

[ShawnC6]

I don't think they would care.

Regardless of they cared it caught the attention of people who can change things, and they aren't about to push their luck with arguably one of the most prolific rifles in Canada.

Nothing is going to happen to the sks.

 

[bobdbldr]

Thank your lucky stars, in my opinion. The gods have deliver a fully automatic Kalashnikov unto thee !! Find a secluded place, keep the "malfunctioning" trigger--and enjoy the pleasure of full auto fire. P.S. Keep your little secret to yourself.

What kind of Moron are you, 1. It is not a full auto trigger it is broken, the gun fires from putting the bolt in battery!
2. What you are suggesting is illegal if the trigger was auto, which it isn't, a moderator should have a discussion with you on the rules of this site. We don't need trollers making illegal and dangerous suggestions on this website!

 

[hical.ca]

We sell new sear & spring kits that will solve your negative engagement issue, spring loaded Murray firing pins in stock as well, HERE.

 

[iger13]

What kind of Moron are you, 1. It is not a full auto trigger it is broken, the gun fires from putting the bolt in battery!
2. What you are suggesting is illegal if the trigger was auto, which it isn't, a moderator should have a discussion with you on the rules of this site. We don't need trollers making illegal and dangerous suggestions on this website!

 

[shredder]

What kind of Moron are you, 1. It is not a full auto trigger it is broken, the gun fires from putting the bolt in battery!
2. What you are suggesting is illegal if the trigger was auto, which it isn't, a moderator should have a discussion with you on the rules of this site. We don't need trollers making illegal and dangerous suggestions on this website!

Guys, I saw lots of sarcasm in his post........