Solved. Thanks Guys.

[Jawshua]

Can't seem to figure out how to remove the stock on a Grizzly. It doesn't have a hole in the stock like a 870 does. Any ideas?

 

[gunnut604]

Pretty sure you just pull the butt pad off and remove the bolt

 

[Nine]

There are plugs in the recoil pad. Remove these and you will see screws. Remove the screws and recoil pad. The stock is hollow and you will see either a bolt head or slot bolt face.

 

[Grove]

Yup you will need a long screw driver or a screwdriver bit put onto a ratchet with an extension.

 

[Jawshua]

That did the trick. Thanks for the info guys. Cheers