Some issues breaking down BCL

[Forbius]

Over the weekend I had broken down my BCL 102 to give it a good clean and oiling. When I attempted to break down my bolt carrier group, I was unable to remove the cam pin out (super stiff). Any suggestions to get this out?

 

[RAConnol]

Goto 4:15 and this might help.
The AR10 (BCL) and AR-15 have similar bolts, that just differ in size.

 

[Forbius]

Goto 4:15 and this might help.
The AR10 (BCL) and AR-15 have similar bolts, that just differ in size.

Yes, he pulled it out so easy. Mine is so tight she won’t pull out (lining up to gas tube no issue). Now I am following BCL manual instructions.

 

[RAConnol]

The cam pin came out fine on my BCL when new. I keep the BCG wet with synthetic oil after each cleaning and the cam pin come out without much effort.
You might want to give the BCG a good soak with Carbon Killer, Brake Cleaner or the same in a gun specific product if you have some laying around.

 

[Forbius]

Yeah that’s what I am thinking too. Seems odd it’s so stiff.

 

[Slampert]

I don't mean to say this as an insult or anything but have you removed the firing pin first? Because no joke I have tried to take the cam pin out before the firing pin...