Some old, some new Grizzlies in Stock

I remember buying a 12 inch barreled one for 399.99 around ten years ago, didnt seem like that dramatic an increase in price to me, everything is more exspensive now
 
Do these work with 870 buttstock kits? Specifically the Mesa Tactical LEO adjustable stock kit?

I would order the 8.5" tube fed IF the stock kit is guaranteed to fit.

Thanks
 
Butcherbill said:
So it looks like the 8.5” and the 12.5” in the pic have the barrel ring in the same place? If so you can swap barrels between the two but you can no longer swap a 12.5” on an actual 870 receiver or an old grizzly receiver?
Click to expand...
It looks like the mag tube is shorter on the 8.5". So, it doesnt look like you could swap barrels with a 12". Someone out there please correct me if I'm wrong.
 
Scott Bear said:
It looks like the mag tube is shorter on the 8.5". So, it doesnt look like you could swap barrels with a 12". Someone out there please correct me if I'm wrong.
Click to expand...

On the left from top to bottom of the pic, 8.5”, 12.5”, 14” by the looks of it. The top two line up visually at the front of the receiver and the end cap of the mag tube, both have a shorter mag tube than the 14” on the bottom. Going by the pic it looks like the 12.5” won’t fit on the 14” version which will be the same mag tube as a reg 870 or older grizzly. The older generations were interchangeable from the 12.5” on up as they had standard length mag tubes and the barrel rings were all in the same location, only the 8.5” had a shorter mag tube.

jiffx2781 said:
Do these work with 870 buttstock kits? Specifically the Mesa Tactical LEO adjustable stock kit?

I would order the 8.5" tube fed IF the stock kit is guaranteed to fit.

Thanks
Click to expand...

If they didn’t change the receiver in anyway the Mesa stock adaptor will still fit, it did on the older generations of the Grizzly’s.
 
I won't have much time here on the weekend, sorry.

All Grizzlies are made in China. The Kodiak is Turkish

They are the same as always; 870 clones

The finish and workmanship looks better than last time.
 
I was waiting for those 14 with some friend since the announcement to build some tac 14 clone.... so sad that no 14 bead sight tube fed available....
I was planning to get 2 for myself, but none....
 
NoxDsm said:
I was waiting for those 14 with some friend since the announcement to build some tac 14 clone.... so sad that no 14 bead sight tube fed available....
I was planning to get 2 for myself, but none....
Click to expand...

looks like the 14 inch tube fed would take the short or long 870/dlask barrels
 
8.5" Bead Sight Mag-Fed with top rail and larger safety button installed, random red dot just for poser pictures.

Action slightly open in the first pic.
vnp8JYS.jpg

DXYImNV.jpg


Going to toss on an AR collapsing stock later and see how it tickles the pickle. :)
 
Had to dig through my spare parts to find a long buffer tube to keep the overall length over 26", currently sitting at 26 1/4".

5hw9w0k.jpg
 
You must log in or register to reply here.
Back
Top Bottom