Sometimes a boner just isn't enough.....

[Wally]

Glad you finally have your XCR-M Wally. I ordered mine in OD Green so I'm going to have to wait a little longer.

Thanks I wanted OD green to but I didn't want to wait and I didn't want to pay an extra $125.

 

[epic]

http://youtu.be/4pXfHLUlZf4

 

[Dench]

Very nice... I want one!

 

[DougPeach]

That is beautiful...

 

[disky1]

had mine out today also. over 100 round through already, and tried to turn down gas. wouldnt eject brass. 168gr federal law enforcement tactical printed some alright groups but im not a very good shot. need some glass also.

 

[AlexF]

had mine out today also. over 100 round through already, and tried to turn down gas. wouldnt eject brass. 168gr federal law enforcement tactical printed some alright groups but im not a very good shot. need some glass also.

Clean it, lube it and keep your gas port to maximum opening for 200 rounds.
Back off a bit if you feel trigger slap (I won't need to explain what this is, you'll know it right away )
Make sure that your gas block is tight and you should then be able to use lower setting.

Alex

 

[Armedsask]

Someone else posted their rifle came with a spare bolt hold open. Did yours as well?

Does Rob Arm now consider the bolt hold open to be a consumable item?

 

[macsailer]

Someone else posted their rifle came with a spare bolt hold open. Did yours as well?

Does Rob Arm now consider the bolt hold open to be a consumable item?

That was me. I ordered another one for my XCR-L, as the one on there was buggered. To date, on my -M, no problems what so ever, with ~ 300 rnds through it!

Mac

 

[Wally]

I have my Mark 4 sitting here on my desk.... just need rings now.... AHHHH

 

[07blackwater]

Cool rifle Wally.

 

[ntm]

had mine out today also. over 100 round through already, and tried to turn down gas. wouldnt eject brass. 168gr federal law enforcement tactical printed some alright groups but im not a very good shot. need some glass also.

I turned mine down to the second highest position at 200 rounds and down to the third highest at 300 rounds. That's with mfs steel cased for plinking and federal 168 grain gmm for accuracy testing. No difference in ejection between the two that I could tell.

Finally got some p-mags today !

And another vid at the range, only had the one five round mag though
Bring on that xcr-m pistol (or more specifically, the xcr-m pistol mags )
http://vimeo.com/37223224

Regards,
Nathan

 

[Danimal247]

Nice posts! I just ordered a micro, super upped to get it!

 

[Jeff/1911]

GREAT video Wally!!! I'm sold!

 

[Timbertec]

You need to put some of this:

on your boner (and rifle )

Seriously though... nice kit!