Spearhead Machine lever action muzzle brake -Marlin 1895 1894 Henry X SW 1854 Chiappa

Spearhead Machine

Spearhead Machine

Member
Business Member
Rating - 100%
7   0   0
Location
Markham, ON
Spearhead Machine 2 baffle radial muzzle brake, now available for your Ruger Marlin 1895 SBL Trapper Guide gun, 1894, 336, S&W 1854 traditional/stealth hunter, Henry X , Pedersoli Boarbuster, Chiappa 1886 Take Down and Chiappa 1892

Designed for your lever action rifles in 45-70, 45 Colt, 44 Mag, .357/38 spl. Greatly reduces recoil while keeping a sleek low profile.

Proprietary true 2 baffle design. 90 degree radial ports intersect to create expansion chambers and forms true baffles for maximum recoil reduction with no concussion. Really stops the “Thump”. Not your average 45-70 radial muzzle brake.

.840″ in diameter. Muzzle brake is back tapered for a flush fit. Only adds 1.125″ forward of your barrel muzzle. (Diameter matches Chiappa 1886 Takke Down and back tapered to match .750″ on the Henry X, .765″ on the Ruger Marlins and .709" on the Pedersoli).

Installs easily without strap wrenches, a tensioning key is included to ensure solid lockup.

Precision machined for exceptional fit and finish. Machined right here in Canada.

Price is $119.99 plus tax and shipping. Please contact or visit Spearheadmachine.com for purchase or more details.

Your satisfaction is our utmost priority, therefore we offer an unconditional 30 day money back guarantee. For any reason you are not satisfied, please contact us and we will arrange a full refund, no questions asked.


Specifications
Diameter: .840″
Length: 1.750″
Weight: 50g / 1.764oz
Material: 303 stainless steel for exceptional corrosion resistance and strength. Stainless, satin and black nitride finish.


Thank you for your interest, we look forward to being a part of your shooting excellence.
-Spearhead Machine

image0 (1).jpg
tapered-radials.jpg
1.jpg
Marlin 1.jpg
 

Attachments

  • SW1854-04.jpg
    SW1854-04.jpg
    19.4 KB · Views: 287
Last edited:
In my opinion, nothing beats a Spearhead Machine muzzle brake.

They look amazing, fit perfectly, reduce recoil by 30-40% and are made in Canada.

Way nicer than a Ranger Point Brake.

I have two Spearhead Machine brakes, absolutely incredible to say the least.

Buy one, you will not be disappointed!.......:)
 
Thank you for the kind words and support Thunderhog, we truly appreciate it.

We're honoured to be a part of your shooting excellence, thank you once again.

Best regards,
-Kevin
 
Would the Spearhead Machine 2 baffle radial muzzle brake for either the Henry or Marlin, fit the Pedersoli BoarBuster in 45-70?

fYoX8jD.jpg
 
Hello Jay,

Thank you for your interest and inquiry, we sincerely appreciate it.

I've not measured the Pedersoli BoarBuster in 45-70 myself but doing a quick search an article mentioned its 5/8-24 threads. If this is the case, the Henry X version will fit, although the back taper may not match the barrel diameter exactly, as the Henry X version tapers to .750 to match the Henry X barrel profile.

A approximate way to see if you have 5/8-24 is to caliper the outside diameter of the threads, it should be close to but not exceed .625". Then lock your calipers to .041", .083", and .125" and see if the calipers spacing line up with the spacing of the crest on the threads. Or if you have a 5/8-24 muzzle device laying around, you can try screwing it on.

Any questions please don't hesitate to contact, we're here for you. Thank you once again Jay.

Best regards,
-Kevin
 
wallz said:
Any intention to make a brake for the Henry X 44 mag?
Click to expand...

Hello wallz,

Thank you for your interest and inquiry.

Our Henry X brake in 45 cal would also work for the Henry big boy X in 44 mag as they are both 5/8-24 muzzle threads. The 45 cal brake exit bore diameter also clears the 44 mag bullet diameter.

Although I've not measured the barrel diameter on the Big boy X yet, but if its like the Henry X model where the barrel diameter is .750", then the back taper will mate exactly.

Any questions please don't hesitate to contact. Thank you graciously for your interest and we look forward to being a part of your shooting excellence.

Best regards,
-Kevin
 
Michael94 said:
I know it's a long shot, but any plans for one for the long ranger express with the threaded heavy barrel in 223?
Click to expand...

Hello Michael94,

Thank you for your interest and inquiry.

We have made the 2 baffle radial brake in 1/2-28 in 223 caliber and we are expecting them back from black nitriding next week.
 
Order placed!

Tip of the hat to Kevin for his top notch customer service.

Cheers
Jay

Spearhead Machine said:
Hello Jay,

Thank you for your interest and inquiry, we sincerely appreciate it.

I've not measured the Pedersoli BoarBuster in 45-70 myself but doing a quick search an article mentioned its 5/8-24 threads. If this is the case, the Henry X version will fit, although the back taper may not match the barrel diameter exactly, as the Henry X version tapers to .750 to match the Henry X barrel profile.

A approximate way to see if you have 5/8-24 is to caliper the outside diameter of the threads, it should be close to but not exceed .625". Then lock your calipers to .041", .083", and .125" and see if the calipers spacing line up with the spacing of the crest on the threads. Or if you have a 5/8-24 muzzle device laying around, you can try screwing it on.

Any questions please don't hesitate to contact, we're here for you. Thank you once again Jay.

Best regards,
-Kevin
Click to expand...
 
I mean, I ordered it late last night, and they had it in the mail this am!

Cmon guys you are allowed to have a long weekend you know. No one would knock you for it.
 
Jay said:
Order placed!

Tip of the hat to Kevin for his top notch customer service.

Cheers
Jay
Click to expand...

Thank you graciously for your help and support Jay! We sincerely appreciate the opportunity to be a part of your shooting excellence.

It will be back tapered to .709". Looking forward to seeing your Boarbuster with the brake.

Cheers
-Kevin
 
wallz said:
I mean, I ordered it late last night, and they had it in the mail this am!

Cmon guys you are allowed to have a long weekend you know. No one would knock you for it.
Click to expand...

I hear you wallz, we strive for the best service possible :)

As shooters ourselves, it is very important to us for shooters to get their products as soon as possible.

Thanks again. Cheers

-Kevin
 
Thunderhog said:
In my opinion, nothing beats a Spearhead Machine muzzle brake.

They look amazing, fit perfectly, reduce recoil by 30-40% and are made in Canada.

Way nicer than a Ranger Point Brake.

I have two Spearhead Machine brakes, absolutely incredible to say the least.

Buy one, you will not be disappointed!.......:)
Click to expand...

How is it nicer than the RR? More recoil reduction? Nicer finish?

Did you shoot the two breaks back to back with the same caliber?
 
No order here but just wanted to say those are really nice and great looking machining work...happy to see them made in Canada!
 
Joel said:
No order here but just wanted to say those are really nice and great looking machining work...happy to see them made in Canada!
Click to expand...

Thank you for the kind words Joel, we're super proud to be a part of the Canadian shooting community.



More offerings and calibers in the works, will have brakes available for Chiappa and Pedersoli soon after they are back from black nitride.
20230811_110931.jpg
 

Attachments

  • 20230811_110931.jpg
    20230811_110931.jpg
    81 KB · Views: 168
You must log in or register to reply here.
Back
Top Bottom