Sqibman 20A

[Innercity]

I purchased one of these as an incomplete rifle, for a Friend who is looking for parts for His.
It's missing the extractor/spring and the bolt handle. Probably more.
I have all the recoil springs, Fp, Bolt, end cap, receiver/TG, barrel and the stock.

Do the 20p parts fit?
Is there any source for parts in Canada?
Does anyone have a better exploded view than the one on the Armscor website?

Any thing you guys can add will be great.

 

[camster]

most parts will be a direct swap.

I have encountered 2 different kinds of trigger, one having a pin through the reset (spring loaded lobe on the end of the trigger), and the other without. The receivers vary accordingly, one with a skinny cut (no pin) one with a wider cut (to accommodate the pin). I have removed the pin, and swapped complete trigger groups. So even if you have the 2 different styles, they can be fitted.

Be very careful with those triggers! They are aluminum, and break easily/often.

This link is stolen from stevespages. An awesome site with lots of different manuals

stevespages.com/pdf/armscor_20.pdf

 

[Innercity]

The TG is good.
(http://i.imgur.com/GrV1luQ)

What do you mean by most parts, Witch parts?

 

[camster]

The TG is good.
(http://i.imgur.com/GrV1luQ)

What do you mean by most parts, Witch parts?

The trigger won't always be directly swapable, some fitting may be required. The parts you list should go back n' forth without issues.

 

[camster]

just looked at that trigger group picture...that magazine catch doesn't look right

 

[Innercity]

Well to bump a old thread.

I just received a 20P parts rifle from a fellow GGNer.
As it seems the extractor is different and the 20P bolt is a larger diameter.
So I'm still searching for a 20A extractor setup.

As for the Mag catch it's oldstyle from a 20A, it's just a spring with a rivet.