Sr22 need pro 10/22 help

[Donrozon]

Hey CGN

Im looking to upgrade my sr22 .22lr riffle before I spend money on crap parts need some advice how to spend wisely on parts To make this riffle extremely reliable

1) barrel swap any recommendations (is this possible? Black color is a must )
2 ) trigger go Bx or spend a little more on aftermarket trigger kit job
3) extended mag release what’s is the best and reliable one
4) extended charging handle best and reliable one
5) extractor
6) firing pin
7) aftermarket bolt

Thanks for the help

View attachment 238306

 

[Brianma65]

Tactical solutions aluminum barrel.
Very light and very accurate

That’s all I got.

 

[HGBMTL]

Go with Kidd components and never have any regrets

 

[rjg333]

Add a reciever and stock to your list and build exactly what you want. Always better to have one more gun, rather then a pile of enough parts to almost build one more gun.

 

[coleman1495]

Kidd Ultralight barrel. They come in black.
Kidd trigger kit. These are ~50$ more dollars than a BX trigger but way better.
You can change the extractor and firing pin out to a Kidd.

Not sure about charging handle options. I have a Kidd (see a trend here) but they are fairly expensive.

When in doubt Kidd has the best options.

 

[Donrozon]

Thanks guys

 

[Donrozon]

What’s you think about tandemkross product ?

 

[ReverendX]

So your plan is to replace everything except the receiver, stock, and hand guard?

Its your money so obviously you can spend it how you like, but I would have just built a custom 10/22. It wouldn't have the tactical look, but it would probably be less expensive when its all said and done.

I say this considering the initial investment of the SR22 is probably more than a custom receiver, stock, vblock, and pins.

With your current rifle I would just go with the BX trigger and an extended bolt handle from DLASK. The bolt handle from DLASK comes with KIDD springs and a new guide rod.

 

[Dave64]

Change cycle spring for target ammo using Kidd components and Kidd trigger kit or even cheaper Kidd trigger springs,to put any more money into that rig would be a waste bet you’ll do .500@ 50m after that your splitting hairs I’ve done 2 with same results.
If your going for looks keep spending. In the end it’s still a 10/22

 

[Arseno]

Thanks guys

Check out Dlask Arms ... They actually have a target grade barrel that's the exact same dimensions as the stock SR22 barrel (0.750"). They also have all of the other parts you have mentioned, either made by them or by Kidd/Volquarsten.

 

[TheWhole9Yards]

What’s you think about tandemkross product ?

Quality stuff, had basically everything they offer for my 22/45.

 

[Sakoman .308]

I would go with a Kidd barrel, and trigger group kit. Mine gives me a 1.5lb pull weight.