Stag 10 build and range review

griffin86 said:
You’re welcome. You also need a carbine buffer and spring. You can get those from Arms East for $45. Not sure if you got a Mil-spec or commercial version of the Magpul CTR, but you will need the correct receiver extension (buffer tube).
Click to expand...

Done and done! Ordered th carbine buffer kit from Arms East - Milspec, and a Raptor LT for an AR10 from True North. I’ve also ordered the clamp version of the gas block and rifle length gas tube from MRA. Now I wait for the parts :). I’ll post progress. Thanks again for all the help!
 
I went rifle length on My faxon barrel and its cycling fairly well. I have had a couple short strokes but I think it’s tight seal on my bolt
 
driller212 said:
TNA had them last time I checked... Although now they don't show up on the website...
Click to expand...

Your not the first to suggest them, but as you have seen it is not even listed on the website anymore.

Couldn't even find one on Brownells with all the different brands of gas tubes they carry
 
griffin86 said:
Could always try ordering the Fulton ones from A z t ec h, but they will probably take 2 months to get here. Fulton has them in stock on their website.
Click to expand...

Out of stock, have not replied to my Email yet, thats where I ordered the barrel. Barrel is in stock in Canada, so thats the crappy part. I'll have the barrel soon, and Id really like to have a gas tube for it at the same time or sooner then 1-2 months

Waiting to see if they can get one in time for the next import as that seems to be the only place that even has these listed for sale on a website that I can order from
 
Can someone tell me what magazine will fit the Stag 10 chambered in 6.5 Creedmoor? I bought a PMAG .308 and it won't fit into the mag well? Too big...
 
So can we confirm that we need an armalite length gas tube for these faxon barrels?
Pondering the 18.5 at ctsc but all I have here is lantac dpms rifle length tubes and certainly don't want to #### around trying to locate more gas tubes.
 
45ACPKING said:
So can we confirm that we need an armalite length gas tube for these faxon barrels?
Pondering the 18.5 at ctsc but all I have here is lantac dpms rifle length tubes and certainly don't want to #### around trying to locate more gas tubes.
Click to expand...

I measured and it was ~3/8” longer from gas port to barrel extension than my other barrels.

I would order an MRA from SFRC, it’s 15% off.
 
You must log in or register to reply here.
Back
Top Bottom