STAG-10 In the Wild!

Younka said:
Yes sir, this is most of the stuff

V7 titanium bolt
20” fluted BSF barrel
V7 titanium muzzle break
Smoke composites hand guard, grip, stock
Elftmann 2 stage trigger
Superlative arms adjustable gas block
Lantac nitrided gas tube
Radian raptor charging handle
Strike industries forward assist
Red accessories timber creek
Click to expand...


Where did you get the CDN flag dust cover ? .
Thanks
 
My 2nd stag build at 7.5lbs as you see her and 9lbs with scope.

I used parts lying around and parts i thought looked different or that caught my eye so a build with no real aim really.


PpCuMxC.jpg
 
Here's my lightweight build. Dialed in the gas block and it shoots smooth and soft. Next is to shoot for groups... I'd be happy with sub-moa 5 shot groups lol

48005363161_13180464ce_h.jpg


7.25 lbs without mag and optics, parts list:

Stag 10 GI base (receiver set, buffer, buffer tube, buffer spring)
Tactical Precision titanium muzzle brake
SLR adjustable gas block
YHM nitride black gas tube
MRA fluted match barrel 1:11.25 twist
Brownells Titanium BCG
Radian Ambi CH
V7 ultralight handguard
Velocity 3lb flat shoe trigger pack
Magpul aluminum trigger guard
Magpul extended mag button
Magpul K2 grip
BCM Gunfighter Mod 0 stock
---------------------------------------

I'll be swapping in the below which should shave another 2 oz:

V7 ultralight castle nut
V7 ultralight end plate
V7 ultralight forward assist
V7 ultralight mag release
Strike Industries dust cover

And if I swap out the stock to a MFT Minimalist stock, that will shave another 2.3 oz to bring it below 7 lbs! Pretty good for an AR10 that's not running a pencil barrel :)
 
Last edited:
rally guy said:
Can you post a parts list? Anything special to keep the weight down?
Click to expand...

Here's everything that's not OEM/standard:

Hipfire Eclipse Trigger
MI 15" Handguard
SLR Titanium adjustable gas block
MRA pencil stainless match barrel 18.6", brake (forgot the name)
Brownells Titanium BCG
Magpul UBR2 Stock and BUISes


The stock ain't the lightest, I know.. but I like the UBR :)

The next step would be to find a titanium brake device (like the above post - where'd you get that? :) , that's also shorter, to save on that barrel-end weight (and feel)).

I also think it's be said again and again, the biggest weight savings (real and perceived recoil) is to lighten the BCG, get an ajustable gas block first, then move on to a lighter hanguard/barrel :)
 
Last edited:
tharkhold said:
Here's everything that's not OEM/standard:

Hipfire Eclipse Trigger
MI 15" Handguard
SLR Titanium adjustable gas block
MRA pencil stainless match barrel 18.6", brake (forgot the name)
Brownells Titanium BCG
Magpul UBR2 Stock and BUISes


The stock ain't the lightest, I know.. but I like the UBR :)

The next step would be to find a titanium brake device (like the above post - where'd you get that? :) , that's also shorter, to save on that barrel-end weight (and feel)).

I also think it's be said again and again, the biggest weight savings (real and perceived recoil) is to lighten the BCG, get an ajustable gas block first, then move on to a lighter hanguard/barrel :)
Click to expand...

I imported it from Anarchy Outdoors. The titanium brake is insanely light at 0.7oz. Only downside is that i shoot prone often and with this full port brake, it kicks off dusts more than I like. Most likely will sell it for another brake that only opens to the sides and top.

And yes, agreed that the most cost-effective ways to shave weight would be the barrel, BCG, handguard, and also the stock. For me;

Titanium BCG is 12oz vs Stag factory BCG at 19oz
MRA barrel is 2 lbs 8 oz vs Stag factory barrel is 3 lbs 3 oz
V7 handguard is 9 oz with nut and screw vs Stag factory is 17.5 oz
BCM stock is 8.3 oz vs Magpul ACS stock is 14 oz

Change out the above and you hacked off almost 2 lbs from factory! I know Arms East had these listed at 8.75 lbs in factory form, but it was heavier than that for sure when I weighed it, at 9 lbs.
 
Last edited:
Bonjour43ma said:
I imported it from Anarchy Outdoors. The titanium brake is insanely light at 0.7oz. Only downside is that i shoot prone often and with this full port brake, it kicks off dusts more than I like. Most likely will sell it for another brake that only opens to the sides and top.

And yes, agreed that the most cost-effective ways to shave weight would be the barrel, BCG, handguard, and also the stock. For me;

Titanium BCG is 12oz vs Stag factory BCG at 19oz
MRA barrel is 2 lbs 8 oz vs Stag factory barrel is 3 lbs 3 oz
V7 handguard is 9 oz with nut and screw vs Stag factory is 17.5 oz
BCM stock is 8.3 oz vs Magpul ACS stock is 14 oz

Change out the above and you hacked off almost 2 lbs from factory! I know Arms East had these listed at 8.75 lbs in factory form, but it was heavier than that for sure when I weighed it, at 9 lbs.
Click to expand...

Well, if you're going to get rid of that brake at some point, we can talk :)

The MRA pencil barrel is 1oz shy of 2lbs IIRC, so you'd save another 9oz!


Sakonut said:
What buffer and spring did you build with for that UBR stock?
Click to expand...

Uh, not sure.. i think it's a generic carbine length tube/buffer/spring. I can have a look later, but I consider those parts "generic", nothing special. I might 'upgrade' to the JP silent spring set up though.


Also, alex.nie, nice... how did it shoot??
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom