stag 10 LPK? which one fits?

D

Djb1

Regular
Rating - 98.6%
206   3   0
Location
Edmonton
I'm thinking of buying the stripped receiver set from CTCS.
Just wondering if trying to find a proper fitting LPK is going to be a PITA and if I should wait for the built receivers to come back.
Any one here built from the stripped set and can confirm an LPK?
 
You don't need a lower parts kit. It already comes with everything you need save for a barrel, gas block, gas tube, bolt carrier group, charging handle, buffer, buffer spring, buffer tube and stock.

Djb1 said:
I'm thinking of buying the stripped receiver set from CTCS.
Just wondering if trying to find a proper fitting LPK is going to be a PITA and if I should wait for the built receivers to come back.
Any one here built from the stripped set and can confirm an LPK?
Click to expand...
 
Now that I look around and compare prices I realize theirs are quite inflated. Thank you for the warning.
Here's hoping some more receivers land early in the new year!
 
onetwentyish said:
The CTCS one does not come with an LPK and as a result is $40 less. OP, CTCS is a rip off, the grip alone is worth $25 and the rest of the kit is a good $100 value.

CTCS looks cheaper but its actually more expensive.
Click to expand...

Almost everything that store sells is very inflated...I learned that very long ago.
 
FoxAlpha said:
Don’t the stags come from factory with LPK’s?
Click to expand...

Initially none of the sets did, hence why AEI and IRG sold them for... $5xx? I think it may have been $540 a set.

Then AEI got IRG cut out and have since only offered Stag kits with LPK, FA, ejection port door, and Hogue grip for $640.

CTCS' bare upper/lower combo is the first of its kind I have seen offered in months.
 
onetwentyish said:
Initially none of the sets did, hence why AEI and IRG sold them for... $5xx? I think it may have been $540 a set.

Then AEI got IRG cut out and have since only offered Stag kits with LPK, FA, ejection port door, and Hogue grip for $640.

CTCS' bare upper/lower combo is the first of its kind I have seen offered in months.
Click to expand...

Yeah the initial run that was the 550-580 price range that I got mine from, and it came ready to go with full LPK installed. I’ve never even heard of them coming stripped.
 
Stag arms has the sets, with LPK for $234 US

So couldn’t you have ## .... import this for you.

Shouldn’t cost no more than$450 Cad
 
onetwentyish said:
Initially none of the sets did, hence why AEI and IRG sold them for... $5xx? I think it may have been $540 a set.

Then AEI got IRG cut out and have since only offered Stag kits with LPK, FA, ejection port door, and Hogue grip for $640.

CTCS' bare upper/lower combo is the first of its kind I have seen offered in months.
Click to expand...

I was fortunate enough to get one of the $540 receiver sets from Arms East and it came complete with upper and lower parts kit installed.

I should have bought a couple more at that price if I had of known where the price was heading.

The stripped sets for $599 are a rip off. There is nothing wrong with the upper and lower parts kit on the Stag receiver. Even the trigger is useable. A little heavy but it is smooth. Even where the prices are now I'd gladly pay the $40 more from AE to get it with the parts kits installed.
 
Last edited:
onetwentyish said:
Initially none of the sets did, hence why AEI and IRG sold them for... $5xx? I think it may have been $540 a set.

Then AEI got IRG cut out and have since only offered Stag kits with LPK, FA, ejection port door, and Hogue grip for $640.

CTCS' bare upper/lower combo is the first of its kind I have seen offered in months.
Click to expand...


I got one receiver set from the first round and second round. My receivers are in the 2000 serial number range and within 400 units apart by serial number.
Both were advertised with the LPK , dust cover, forward assist ect..... both were landed in BC from AE for 630.00 each , taxes and shipping included. I never saw AE advertise these without the LPK and upper bits and I was following this release from day 1.
 
AE are out of stock.
But when they first released them for $589 , it included,A complete set.

Same as their sets, which are now $639
 
from what i understand about AE..... when an item sells out but is coming back in to stock down the road..... the items listing stays up but the price reverts to msrp. So even though it says 639 right now and not in stock...... it could actually just be that way to keep the competition on thier toes :)
 
I got the Stag 10 receiver set from CTCS, they had a 10% off deal too so worked out to $540. Gonna put a Geiselle in anyways so no big deal. Quick question, will a .308 AR dust cover assembly for an Aero Precision or DPMS LR-308 work?
 
You must log in or register to reply here.
Back
Top Bottom