Sticky for pressure signs?

[huntingfamily]

I am interested in something if one of you guys wants to put a couple numbers through quickload?

6.5-284
H1000.
Cci large rifle magnum
156 Berger eol
Coal 3.210”
24” barrel

223 remington
Cci srm
Varget
85.5 berger
2.551”
29” barrel

6br
Varget
24” barrel
Cci srm
109 berger hybrid
2.371”

We’ll see how close quickload is to what I have for info.

It won't be very accurate because you're not providing enough info.
Garbage in = garbage out.
If you can provide the velocity of each example then a reasonable pressure value could be obtained from QL.
How far off of the lands are you for each example?

 

[Bustercluck]

It won't be very accurate because you're not providing enough info.
Garbage in = garbage out.
If you can provide the velocity of each example then a reasonable pressure value could be obtained from QL.
How far off of the lands are you for each example?

So you can’t get a reasonable pressure without first putting the lod over a chronograph? I’m going to have to look at this some more. I thought it was supposed to give some kind of reasonable load suggestions by the data you provide to get a starting load?

Maybe I’ll buy it and mess with it some.

 

[huntingfamily]

So you can’t get a reasonable pressure without first putting the lod over a chronograph? I’m going to have to look at this some more. I thought it was supposed to give some kind of reasonable load suggestions by the data you provide to get a starting load?

Maybe I’ll buy it and mess with it some.

It does. See the attachment I posted for the data you should provide for best results.
Finally, you chronograph the loads and calibrate quickload to match your actual velocity.