Stoeger M3k

[nimrod#1]

Just looking to see what people think about them particularly the 24 inch model.also looking to see if anyone has a measurement from the end of the mag to end of the barrel so I can figure out a mag extension .

 

[play.soccer]

I think you want the +5 extension so that it is .5" past the muzzle. That's what I've read. I am looking for a mag extension for my m3k.

 

[nimrod#1]

Thanks,tactical ordinance has them,

 

[warlordof3]

Just looking to see what people think about them particularly the 24 inch model.also looking to see if anyone has a measurement from the end of the mag to end of the barrel so I can figure out a mag extension .

I have the M3k since Aug./'16 and so far it's been reliable as long as they're fed a minimum of 1 1/8oz, 3 dram (equates to 1200fps) loads. So far for 3gun, magpies and pigeons, I've used cheap Federal, Score & Challenger birdshot (meeting min. specs), and Score slugs with no issues. I ordered a 3 round extension from S&J Hardware made for the Benelli Nova - I got the +3 to help make loading easier (in theory) and just made my own plug so I can get 5 1/2ish, 3" shells or 6 1/2, 2 3/4" shells in the tube + 1 ghost loaded + 1 in the chamber = 8, 2 3/4" shells total. The end of my tube sits 4 1/4" below the extended choke. I also ordered another mag spring and the no jam follower from S&J. While no Benelli M2, it's also half or less than half of the M2 and so far I can't really say anything bad about it....other than length of pull was way too long for me so I ended up chopping my stock down.

 

[nimrod#1]

Thanks for the info guys,anyone have them in stock?