majormarine
CGN Regular
- Location
- Lower Mainland, BC
Hi guys!
I have a stuck case (7.62x25TT case) in my LEE Powder Through Expanding die.
Somehow, i only lubed the case body but not the shoulder and neck in/out. , it was already too late when i realized it!
i can see the bottom of the case from the top of the die, as there is a big enough hole after removing the top part of the die which accomodate a funnel or a powder hopper.
i am wondering if i can spray some penetrating oil into the die and try to knock the case out from the top with a metal rod and a hammer? or any other ideas?
right now, the die and the stuck case is on my single stage press.
I have a stuck case (7.62x25TT case) in my LEE Powder Through Expanding die.
Somehow, i only lubed the case body but not the shoulder and neck in/out. , it was already too late when i realized it!
i can see the bottom of the case from the top of the die, as there is a big enough hole after removing the top part of the die which accomodate a funnel or a powder hopper.
i am wondering if i can spray some penetrating oil into the die and try to knock the case out from the top with a metal rod and a hammer? or any other ideas?
right now, the die and the stuck case is on my single stage press.
2nd thought, hold off on the hammer, that was for a decapping die.
