Stuck for a 1911

Lfsabch

Lfsabch

CGN frequent flyer
Rating - 100%
18   0   0
Location
Oshawa ontario
so ive been cruising around the site absorbing as many 1911 threads as i can, now, its seems each manufacturer has its own little hiccups that can arise with the 1911s,

so far my thoughts are (but not limited to) a kimber, springfeild arms, para ordnance,or taurus

i have stumbled on some bonds(gotta love it) that were kept away for a bit so my budget is roughly $1200

trying to look for a consensus on a lower hassle type 1911 in regards to service, common issues or little things to look for,

any help is appreciated
 
I did not see STI in your list but I would put the STI Trojan at the top, then Kimber, then Springfield. All of these guns are available with a lot of custom features that require little or no modifications out of the box.

I have never seen a Dan Wesson but it might also be a possible.

Taurus look OK and you get a lot of features for the money (around $800), but I remember seeing problems with older Taurus revolvers (a long time ago) so I would check on those first. Some members have posted on them here and seem very happy with them.

Norinco 1911's are in another class, good value and easily fixed up as they take all the standard 1911 parts. There are some very positive comments on the latest model that is available in blued or 2 tone. It seems to come with a lot of features.
 
I would say buy a Norinco 1911 first, latest model with almost all the features. You figer out what you like and what you don't.

I also own a sti ranger II, so far the best 1911 I ever seen, So, put STI in your list.

Just my 2c
 
thanks guys, ya i was going over all the STI on the sponsors site, i just figured they were out of my reach although the Spartan seemed reasonabley priced. so i amy look into them more.

mainly for just basic target unless i get the urge again to go for ipsc or other organizations.

should add that i do like the looks of full length barrels, 5inch or so
 
Last edited:
The Spartan is probably the best bang for the buck in a 1911, excellent quality - probably the only gun I haven't seen get slagged on the 'net.
 
Colt.

I think all 1911 fans would agree you can't go wrong with one.:runaway:

Your budget is pretty decent for a pistol only, but will get whittled away pretty quick with accessories like mags, holster, mag pouches, etc. if you want that stuff, and are looking to purchase new.
If it is for the pistol only, start looking at the different options you want.
For example, lefties tend to need or want the ambi safety.
While you can swap out some of these parts, some of them need to be fitted by either a gunsmith or a hobbiest that really knows what they are doing. Also, some aftermarket parts can be pretty expensive if you add them up, and would be less expensive if you go for the model that comes with them already installed (stuff like front cocking serations, metal checkering or texturing, sights, etc.).
Ambi safeties, beavertail grip safeties, triggers, and hammers generally need fitment -this may be a bit daunting to start.
Easy stuff like grips, springs & backstraps can just be swapped.

I'd recommend poking around 1911 org and other sites to bone up on how they work, and what makes them tick.

Good luck with the purchase!
 
tobin said:
Taurus look OK and you get a lot of features for the money (around $800), but I remember seeing problems with older Taurus revolvers (a long time ago) so I would check on those first. Some members have posted on them here and seem very happy with them.
Click to expand...

The beauty of Taurus 1911s is that despite it coming from a manufacturer with questionable service....it is a 1911 afterall - easy to buy aftermarket parts for, that fit.
 
beltfed said:
Colt.

I think all 1911 fans would agree you can't go wrong with one.:runaway:

Your budget is pretty decent for a pistol only, but will get whittled away pretty quick with accessories like mags, holster, mag pouches, etc. if you want that stuff, and are looking to purchase new.
If it is for the pistol only, start looking at the different options you want.
For example, lefties tend to need or want the ambi safety.
While you can swap out some of these parts, some of them need to be fitted by either a gunsmith or a hobbiest that really knows what they are doing. Also, some aftermarket parts can be pretty expensive if you add them up, and would be less expensive if you go for the model that comes with them already installed (stuff like front cocking serations, metal checkering or texturing, sights, etc.).
Ambi safeties, beavertail grip safeties, triggers, and hammers generally need fitment -this may be a bit daunting to start.
Easy stuff like grips, springs & backstraps can just be swapped.

I'd recommend poking around 1911 org and other sites to bone up on how they work, and what makes them tick.

Good luck with the purchase!
Click to expand...

+1 on the Colt. Dont have any experience with the STI's, but my Colt model 70 has been fantastic! It is a workhorse and feeds ALL kinds of ammo, never any issues. I had some 230gr form Combatmasters that my buddy's brand new $1200 para-ordinance woudn't feed, and my 1911 eats it up! From what I hear, the STI is a great choice too :)
Good luck :cheers:
 
From first hand experience, I can definitely endorse an STI Spartan and, if you wish to spend a bit more and have a prettier gun, Dan Wesson (either the Pointman Seven, which is the full-size, or the Commander Bobtail).

These guns offer excellent build quality, materials and out of the box accuracy. The Dan Wessons also feature no MIM parts - the Commander even comes with Trijicon Tritium night sights as standard.

My friends and I have successfully purchased three Dan Wessons from Walter at Arms East (a CGN sponsor) over the past 6 months with excellent service and quick delivery.
 
I bought Tanfoglio Witness Custom over a year ago and it turned out to be very accurate gun with ambi safety and adjustable sights. So far everybody who owns a few 1911's and tried mine regarded it highly. I myself with my limited experience can't really say much but Norc's are ugly and horrible shooters with stiff triggers unless you want to buy aftermarket everything. Colt 1911's even custom built are good but not that good to justify twice the price of my beloved Tanfo. I think I paid 735$ for mine, check freedom ventures at the top of this page.
 
i was tempted after some reviews i read on the norincos, im not into the glam as much as right now i just want shooting experience, but i was under the stereotype that norincos were flimsy and not accurate.

so they are still on my list as a cheap alternative before christmas


as for the dan wessons from arms east was it recent?, im not seeing them on their site
 
Lfsabch said:
but i was under the stereotype that norincos were flimsy and not accurate.
Click to expand...

Nork's problem is the surface - especially the inside, can be very rough.

Other than that its material is better than most other brand. Accuracy is very good for a non-target grade pistol.
 
You must log in or register to reply here.
Back
Top Bottom