Suggested 9mm ammo for beginner?

llew

New member
EE Expired
Rating - 0%
0   0   0
Location
vancouver, bc
Is factory or reload "better" for a newbie just getting into shooting. I'm not looking at getting into competition or anything highly accurate, just want to be able to hit the target quickly (and reckon I'll need at least a few rounds to get comfortable with things).
 
There are factory reloads that are usually a bit cheaper which means you get to practice more for the same money spent on brand new factory stuff. I've shot Wolf and Canadian BDX in the past and they shot well.

Don't go buying John Doe's back of the truck reloads...
 
Buy the cheapest factory you can find ...and practice a lot!!

I agree, cheapest you can find. I got started into reloading just to feed my Glock 17 9mm at a cheap price cause I cold not afford factory ammo. I picked up cases at the local ranges and police range for free, then scrounged wheel weights from local tire shops, junkyards. I made a metal bullet trap so that I could recover all fired lead rounds so I could recast them. I really only paid for powder and primers which I bought on sale. Made it very cheap to shoot the 9mm with a little effort and time.
 
If you're shooting lead pills down a factory Glock barrel, keep an eye out for leading and be try and be religious with your cleaning post range session. Otherwise, buy an aftermarket barrel like a Stormlake or LoneWolf in the same caliber or conversion caliber.
 
Just shop around and finds whats cheapest or on sale. Generally Winchester White box is really cheap and so are Blazers. I just picked up some LCW from CanAm and find it shoots and feeds well.
 
If economy is your thing, maybe consider the current CanadaAmmo deal on 9mm (nonreloadable, but that likely won't matter to you). If you buy another $21 worth of stuff from them at the same time, the ammo will ship for free (another big bonus):

https://www.canadaammo.com/product/detail/750-round-case-of-lcw-9mm-luger-124-gr/

Steel cases are reloadable, maybe once or twice before they split. They seem to never need trimming, however you need to chamfer the inside of the necks to avoid damage to your bullets during seating. I would reload it once and shoot it in situations were it is not practical to recover brass. I guess the steel is harder on your dies after a while, but if you clean them up and lube properly, it will be minimal.
Also, trimming might be hard on your cutters.

PICT0005_zpsf2fcc5b6.jpg


The best part is at the end of the day you will know what brass, or rather, steel is yours.
 
I've been shooting for over 5 year and all the pros keep telling me to stay away from steel. it's cheaper and does more damage to the internals of the pistol. I suggest to find bulk deals of 1000 rounds ( not talking about 22lr ammo )and practice with them until you finish. If you keep changing from different manufacturers every time you will not have consistency with your shots. Get to know you pistol first then slowly try different ammo and you'll notice how or what the change is. If your getting a 22 then use CCI mini mag and you will not have jams the other cheap brick are not worth it as you be more frustrated with stove tops and jams . The best deal or ammo is the one that you shoot the best with. Also always clean your firearms after every session :)
 
So I'm wondering about the same thing. What's up with this LCW at Canadaammo.com 750 for 179.99? Is this stuff reliable? It's a killer price and I need to put a lot of rounds through my gun to start getting good with it. Any advice?
 
I use the MFS steel cased stuff from time to time and have had no problems with it. Go for cheap now and decide later if you want to reload. As for going through the hassle (described above) of reloading steel cased ammo once, I'm not sure why anyone would do it.
 
I see SFRC has steel cased 9mm for about the same price per round as CanadaAmmo, but SFRC shipping will set you back about $30 to the West Coast.
 
the Manufactures that I have, Glock, CZ, Beretta, Ruger, SIG, most all do not recommend steel case. If you ask anyone IPSC shoot he would not recommend steel. I you only shoot 100 to 200 rounds a years it's not big deal, but when your shooting 1000 to 5000 in a year it does.

If steel case ammo damages your pistol, you bought the wrong gun. The worst thing I've seen in steel case ammo is a primer seated sideways.
 
Back
Top Bottom