Swiss arms scope rings?

T

Tommeh

Regular
EE Expired
Rating - 99.8%
419   1   0
Location
Beautiful BC
Hi all,

Just looking for some ideas for scope rings for my Black target special. I want to try a scope with a 56mm objective on it and am looking for some recommendations. I have read some other threads regarding scope rings for the Swiss arms however haven't seen any with the 56mm objective. Any help is appreciated.

Thanks!
 
Last edited:
Correction, Burris not Bushnell.

Xtreme Tactical, these are the extra high I used on my Swissarms. You can also use the irons through the hole. Just a coincidence.
420183.jpg
 
Zeiss Victory series steel rings. 30mm Ex-high. They're also quick release so you can change up to an Aimpoint, Eotech etc very quickly. I just used a set of these to mount a Falcon Menace 56mm scope on my Tactical Solutions .22 AR upper works great and looks great.

I used the high 1" Zeiss Victory rings for my 50mm scope on my Swiss Arms PE-90. These rings suit the rifle well.

I have a set of the Burris extreme tacticals on my DPMS LR-308. Good rings but may be a bit bulky for the PE-90. I'd like to see some pics with them on it first.

Also the Zeiss rings are actually Warne rings. Warne makes them. If you can't find the Zeiss brand ones you may be able to find the Warne ones. They are exactly the same except for the small Zeiss logo.

The one on the left is what the quick detach ones look like.

Warne02.gif
 
Last edited:
I bought mine from a local store. Should't be hard to find if you phone around. But.... be prepared neither the Zeiss/Warne extra high rings or the Burris Tactical Extreme rings are cheap. There is some sticker shock. Not as bad as NF rings but still not cheap. In the end it's worth it. Your rig is only as good as the weakest link. No point spending around 3K on a rifle, big money on a scope and the crap rings. ;)
 
You must log in or register to reply here.
Back
Top Bottom