siegehammer63
CGN Regular
- Location
- Calgary, AB
Does anyone know of a folding buffer tube adapter for Ar style buffer tubes? I know of the BE A powers but they're poorly finished, expensive and hard to find.
Cheers
Robert
Cheers
Robert
Swiss Arms Stock adapters
- Thread starter siegehammer63
- Start date
siegehammer63
CGN Regular
- Location
- Calgary, AB
I'll call them tomorrow and see!
angryeyebrows
CGN frequent flyer
- Location
- Oscar Mike
DDLES Adapter. Good for the Swiss guns with AR height optics.
siegehammer63
CGN Regular
- Location
- Calgary, AB
Does anyone have them in Canada, or are they an import only?
Ar180shooter
CGN Ultra frequent flyer
- Location
- Ottawa, ON
Might have to look at one of those ACR adapters....
siegehammer63
CGN Regular
- Location
- Calgary, AB
Selous... where the heck do you get that? Hahahaha! Awesome!
When I owned my swiss rifles until I just sold them on the EE I went through a lot of aftermarket stuff, and ended up returning to the manufacturers product in the case of stocks.
FYI AR stock adapters do not allow the use of AR height optics without the use of a cheek pad / cheek riser of some kind as they put the stock at the same height as factory (except for the rare and OOP DDLES). A cheek pad will then remove the ability to shoot it folded. AR stocks also will require you to cut a hole in them to properly engage the folding lug. At + / - $300 for the adapter only to introduce a new set of stock issues, and not solve any of the original issues, it is a exercise in futility IMO.
Those ACR adapters look cool and have potential, I just don't know how strong the 3d printed material would be compared to the factory stock. Also unless it's hard attached to the lower that picture posted above is a little misleading, the LOP would be longer as the adapter attaches to the folding mechanism, then the ACR stock attaches to the adapter. It will have two folding hinges on the right side, and only one will be operational. It will add more weight to a already heavy rifle that is nearly impossible to shed in other areas.
Ask yourself what you require in the stock? If it's simply adjustable LOP then the factory collapsible achieves that.
FYI AR stock adapters do not allow the use of AR height optics without the use of a cheek pad / cheek riser of some kind as they put the stock at the same height as factory (except for the rare and OOP DDLES). A cheek pad will then remove the ability to shoot it folded. AR stocks also will require you to cut a hole in them to properly engage the folding lug. At + / - $300 for the adapter only to introduce a new set of stock issues, and not solve any of the original issues, it is a exercise in futility IMO.
Those ACR adapters look cool and have potential, I just don't know how strong the 3d printed material would be compared to the factory stock. Also unless it's hard attached to the lower that picture posted above is a little misleading, the LOP would be longer as the adapter attaches to the folding mechanism, then the ACR stock attaches to the adapter. It will have two folding hinges on the right side, and only one will be operational. It will add more weight to a already heavy rifle that is nearly impossible to shed in other areas.
Ask yourself what you require in the stock? If it's simply adjustable LOP then the factory collapsible achieves that.
siegehammer63
CGN Regular
- Location
- Calgary, AB
Fair. I'm mostly trying for commonality of use across all my platforms. The factory folder isn't that bad, just trying to get everything to feel and shoot as similarly as possible.
