T0z-17
- Thread starter kandi
- Start date
It's been a while since I've owned one, but as I recall you simply turn the nose of the bolt. It disconnects and you can then pull it forward from the body. I could be wrong about that, like I said it's been a while.
I also remember someone telling me that a particular Mossberg magazine will fit with very minor modifications. I'd suggest Google searching using Mossberg and TOZ as keywords.
I also remember someone telling me that a particular Mossberg magazine will fit with very minor modifications. I'd suggest Google searching using Mossberg and TOZ as keywords.
That's a very different bolt from what was in my rifle.. The one I had was a TOZ-17-01, which may have been an earlier or later version of the rifle.
Very accurate, but crudely manufactured, would be the best way to describe mine.
Very accurate, but crudely manufactured, would be the best way to describe mine.
I'm reviving an old post, but i landed here trying to find some info on dissassembly of an old beat up toz 16 single shot bolt assembly... I just ended up soaking it in wd-40 for a couple days and slamming the pins with a punch to finally strip the bolt assembly and firing pin apart. If you are looking into doing this just keep in mind reassembly is even worst since you'll have to punch back the spring loaded assembly together. I had to build homemade tools but overall a fun process
Resurrect again, i tried the 802 thing. my toz 17, not 1701 is rounded front but the 802 is .030 inches to thick, after hours of filing it wont feed, my mag has a step in the mag no other has. Buchered a 40 dollar mag.
sales@triplek.com or call 6192322066 they have TOZ mag for sale ,45 dollars ,but you got that spent allready just trying to make something else fit
