Tactical Rimfire Picture Thread! S&W M&P 15-22/Colt M4 Ops/Ruger SR-22/Rem 597 VTR...

Which of these do you think is the sickest!? (the best)

  • S&W M&P 15-22

    Votes: 389 37.0%

  • Colt M4 Ops

    Votes: 137 13.0%

  • Ruger SR-22

    Votes: 439 41.7%

  • Remington 597 VTR

    Votes: 87 8.3%
  • Total voters
    1,052
glockman2 said:
Hi 554.. please do tell where are those mg42 kits sold...? and how much, how heavy..?
Click to expand...

I had to get this one out of the US of A. Pricey. I think with shipping and exchange it was around $200. If I remember correctly it was Numrich. The stock is light, and cheasy if un-finished. I added rails, threw away the lame sights it comes with, added a nice all metal bipod, re-textured and painted the whole thing, used my own bolting system, extended the stock at the back and threw on a flip-up ar-15 rear sight(since this picture was taken). I went with a stainless barrell (I like the shine through the slots) and a 2.2 lb trigger so I can squeeze 'em off quick if I like.
Now I like it. I suppose I should shoot it now.
 
pacosnow said:
stole a page from The_drewster19's book. looks awesome...

001.jpg


002.jpg
Click to expand...

looks good man! my job is still lasting good, nothing has come out or anything, did you wipe it down with gun oil to remove the excess and supposedly 'seal' the crayon in?
 
Hokus Grey said:
I voted SR22, then bought a S&W M&P 15-22.
Click to expand...

good choice on the buy.. been having problems? i just got my extractor in from smith and wesson (2 MONTHS IT TOOK!!!) and took it out shooting only round nose bullets and no problems so far. using old federal high velocities and american eagle high velocity rounds.. not sure on specs just some i had laying around since 95. may switch to CCI, but think im going to stick with round nose bullets as i have heard hollow points may have been a feeding problem on the feed ramp.
 
luke s said:
Well this is how mine evolved so far....

Added carry handle and picatinny rail rubber covers
Skeet%20and%20gun%20config%20small.jpg


Then a fore grip
Skeet%20and%20gun%20config%20059%20small.jpg


And finally a 3-9x scope...
Skeet%20and%20gun%20config%20058%20small.jpg


Think im going to be happy with this configuration, taking it to the range saturday
Click to expand...

im really considering getting a carry handle, i love the look of them and its not like im using scopes on this thing. all 1x for me. right now my clone aimpoint isnt really working all that great, recoil (like nothing) is making it turn on and off which blows, so i ordered an eotech 552 clone, hopefully will have better luck with that, and if it works okay or maybe if im feeling frisky, ill get a carry handle and a mount kit for whenever i want to remount my aimpoint or eotech.
 
the_drewster19 said:
LOVE IT! what mag is that? take the guts out of a p-mag and modify it or what? looks great my man.
Click to expand...

It's a 5/10 Pmag. I just filed the front of the lips about 1/8 down and in. The lips of the pmag fit snugly into the recess in the bottom of the oem mag, and added a generous helping of JB Weld putty. I didn't bother to take out the spring and follower. Added some touch up paint to mask the gray color of the weld.
 
jt_trouble said:
It's a 5/10 Pmag. I just filed the front of the lips about 1/8 down and in. The lips of the pmag fit snugly into the recess in the bottom of the oem mag, and added a generous helping of JB Weld putty. I didn't bother to take out the spring and follower. Added some touch up paint to mask the gray color of the weld.
Click to expand...

well it looks great man good job!
 
jt_trouble said:
It's a 5/10 Pmag. I just filed the front of the lips about 1/8 down and in. The lips of the pmag fit snugly into the recess in the bottom of the oem mag, and added a generous helping of JB Weld putty. I didn't bother to take out the spring and follower. Added some touch up paint to mask the gray color of the weld.
Click to expand...

and how do you like your replica eotech? i just ordered one for my 15-22 and am hoping it will hold up better than my aimpoint.
 
Skeet%20and%20gun%20config%20059%20small.jpg


im really considering getting a carry handle, i love the look of them and its not like im using scopes on this thing. all 1x for me. right now my clone aimpoint isnt really working all that great, recoil (like nothing) is making it turn on and off which blows, so i ordered an eotech 552 clone, hopefully will have better luck with that, and if it works okay or maybe if im feeling frisky, ill get a carry handle and a mount kit for whenever i want to remount my aimpoint or eotech.
Click to expand...


I love the carry handle, it just looks badass with it installed. Got all the accessories from NcStar Canadian distributor (http://www.crosshairs.ca).

The carry handle was 40 bucks, not the most perfect finish on it but I wasnt about to pay $120 to get one from brownells.

The mount for the carry handle was around $11, fore grip $30 and rubber picatinny covers for $9.....

I still want to get a bipod in the future to get some steady shots with the scope.
 
the_drewster19 said:
and how do you like your replica eotech? i just ordered one for my 15-22 and am hoping it will hold up better than my aimpoint.
Click to expand...

I haven't had a chance to live fire with it on yet. I am going to break it in with just the irons for now. Once that is done I will start on the Eotech. It seems to be a solidly built unit. I like the red.green option for crosshairs. Any tests will go into my "my sr22 ... my way" thread this weekend after I do I bit more work on the rifle.
 
jt_trouble said:
I haven't had a chance to live fire with it on yet. I am going to break it in with just the irons for now. Once that is done I will start on the Eotech. It seems to be a solidly built unit. I like the red.green option for crosshairs. Any tests will go into my "my sr22 ... my way" thread this weekend after I do I bit more work on the rifle.
Click to expand...

awesome man, maybe pm me about that thread?
 
luke s said:
Skeet%20and%20gun%20config%20059%20small.jpg





I love the carry handle, it just looks badass with it installed. Got all the accessories from NcStar Canadian distributor (http://www.crosshairs.ca).

The carry handle was 40 bucks, not the most perfect finish on it but I wasnt about to pay $120 to get one from brownells.

The mount for the carry handle was around $11, fore grip $30 and rubber picatinny covers for $9.....

I still want to get a bipod in the future to get some steady shots with the scope.
Click to expand...

sweet, i checked out that site; lots of ncstar lol. turns out they are out of stock on that carry handle, i found a few on ebay that are solid aluminum around the 40 dollar mark. so we will see.. ill check and see how my eotech will hold up once it gets here then ill make the decision to maybe stick with iron sights... my gun looks so badass with just the mbus back up sights on it as well.. might take a pic and just throw it up on here.
 
Slight Variation to my set up ...

With an H&K Battle Grip installed, and no Taclite ... got a space for the light on the right side should I feel the need to shoot zombies at night.

000_0002Medium.jpg

000_0001Medium.jpg
 
the_drewster19 said:
absolutely love it, definitely my favorite sr-22. how much did it roughly all cost you if you dont mind?
Click to expand...

I like this version as well .. more streamlined. Are you sitting down? Altogether including price of rifle and all the external and internal parts plus taxes and shipping .... $1725.00. Which makes this rifle a keeper and never getting sold seeing that I invested a lot into getting it the way I wanted it.
 
You must log in or register to reply here.
Back
Top Bottom