Taylors and Co Revolving Carbines incoming .45 Colt

[Prophet River]

We have five of these coming
https://taylorsfirearms.com/cattleman-revolving-carbine.html
They are 1199.00 (0419)

There is one extra that is Taylor Tuned. $1399.00 ( 0419DE)

All are in .45 LC.

They just missed a load so best guess is 3-4 weeks

 

[JeffMan]

fantastic

 

[Prophet River]

I should mention too that we have these already here in .44 BP. In about a week, we will have the Taylors & Co cylinders in .44 special to covert to a cartridge rifle.
https://store.prophetriver.com/tayl...d-butt-plate-blued-18tapered-barrel-mfg-430b/

 

[bananarama]

so cool!

 

[jjort]

I should mention too that we have these already here in .44 BP. In about a week, we will have the Taylors & Co cylinders in .44 special to covert to a cartridge rifle.
https://store.prophetriver.com/tayl...d-butt-plate-blued-18tapered-barrel-mfg-430b/

\
Are you sure about 44 spl cylinder?.... I have one of these and the conversion cylinder is 45 colt BP

 

[Johnyy]

I should mention too that we have these already here in .44 BP. In about a week, we will have the Taylors & Co cylinders in .44 special to covert to a cartridge rifle.
https://store.prophetriver.com/tayl...d-butt-plate-blued-18tapered-barrel-mfg-430b/

That is sweet! Will you have to re-load/lower pressure, or will modern 44 Special be OK to use? Thnx

 

[Prophet River]

\
Are you sure about 44 spl cylinder?.... I have one of these and the conversion cylinder is 45 colt BP

You are correct, they were just listed incorrectly on the invoice

 

[rwj777]

Oooh, No .357mag?

 

[Prophet River]

Oooh, No .357mag?

Not yet.

 

[hend238]

I’d sure be interested in a 357.

 

[onetwentyish]

I'm also interested in a .357

 

[Prophet River]

I'm also interested in a .357

we will post here as soon as we have some coming. we have all three cals on order in large quantities.

 

[Buster95]

Still non restricted?

 

[Deathrawt]

those are pretty sweet
Definitely gonna have to pick one up sometime, are these going to be a regularly stocked item?

 

[Prophet River]

those are pretty sweet
Definitely gonna have to pick one up sometime, are these going to be a regularly stocked item?

yes, when we can get them

Still non restricted?

yes

 

[Piraci]

How much are the conversion cylinders going to be?

 

[Donald Mackenzie]

I will buy a 45, if and WHEN you can get 45acp cylinder for me to buy at same time. Or just a 45acp revolver carbine, as I really do not need a 45 colt, but will buy it to get a 45acp rifle shooter.

 

[smokinbarrel]

I can pretty much guarantee that you won't like it. The cylinder is so close to your head you get a blast in the face every time you fire it. Unless changes have been made to stock dimensions recently, the comb is about an inch too high, you can't get low enough on it to get a sight picture and the butt plate is so small it won't fit anybody older than 10, you get jabbed in the shoulder by either the heel or toe. They look kind of cool, but as an actual shooter, no.

 

[Prophet River]

How much are the conversion cylinders going to be?

Taylors & Co - Pietta 1858 Remington Conversion Cylinder - .44 to .45LC - Blued - PIERM101 (839665006207) $379.00

 

[soheipp]

Will you be getting them in 357? If so what is approximate date?