TC 73 9MM Lever Gun

Running some rounds through it. Good case ejection, but with only a single extractor on top it’s not throwing brass like my other lever guns
 
Oh wow, that’s not throwing the cases out hard at all. Do you have to work the action quickly for reliable ejection?
 
The packaging is marked with "100% MADE IN THE USA". It is a solid rifle that feels heavier than my Marlins & Winchesters
Thanks

I have a 1873 style in 44-40 and just ordered one in 357, but a little 9mm blaster sounds like fun. I've stayed away from semi auto 9mm carbines because most throw flaming bits of crap in my face (left handed)
 
Finally got around to doing some testing of my various 9mm reloads with the TC-73. Some good increase in speed with reloads using WSF (S&W 929) and Titegroup (CZ Shadow) when fired through the TC-73. Interesting the increase in speed with reloads using N320 were much lower. I even tried a 9mm Major load and got avg 1622 fps. With how solid the TC-73 is built, recoil is minimal.

Grouping ~1" at 17y, next would be taking it to the local outdoor range and try it at 50y, and maybe 100y. I think the limitations there would probably be the iron sights & my old eyes :ROFLMAO:


797829303_10245688365411221_4818253410139270522_n.jpg

9mm ICORE load and 9mm Duty Pistol load
794435921_10245688372091388_4156461032051249473_n.jpg


I tried the N320 load with standard CCI small pistol primers, and one with small pistol magnum as the SD was a little bigger than when I load N320 & 124gr Campro for IPSC. No meaningful decrease in SD, but a noticeable increase in average speed. I think N320 may not be ideal for these light Duty Pistol loads, will just stick with Titegroup.

I didn't bring an Open gun for the 9mm major, but I think it's ~1400fps, so a healthy boost out of the TC-73 to 1622 fps :)

796972057_10245688382331644_6455147446364314985_n.jpg
 
Back
Top Bottom