tech sights for my sks??

I just put a TS200 on a norinco SKS with a ATI monte carlo stock. I had to dremel the stock but it's an aftermarket stock so I wasnt suprised. You will need to remove the rear take down lever, no big deal. Also the original notch sight will need to be removed so you can see the front sight. It was easy, just use a punch to knock out the pin and then remove the spring. I have a 200 series on my 10/22 as well and its great. If its set up properly it will return to zero if you remove for cleaning etc. A 100 series tech site for a 10/22 or SKS can be upgraded to a 200 series buy adding an additional part. I believe the difference is to do with the rear elevation adjustment as the 100 series only has front post height adjustment. 10/22 model comes with front blade sight very similar to an M14 and SKS uses original front post. I'm very pleased with the setup on both rifles and reccomend these to anybody who is interested in shooting with irons. Accuracy is a massive improvment over the factory notch sights on both rifles.
 
You must log in or register to reply here.
Back
Top Bottom