TEFLON / MOLY OVEN CURE, GUN FINISH spray can

I think that the not " shipping " spray cans refers to Canada Post.

Delivery to the stores by truck should be okay. How else would all the stores get products.
 
Can be shipped as long as its by ground. Falls under consumer commodity - not a dangerous goods item. Any compressed air container can not be shipped by air.
 
You might ask Reliable Gun & Tackle if they can get it in for you as I believe they bring in other products from Brownell's. Other than that, you'd have to have Brownell's ship it to a UPS depot in Blaine or Lynden or wherever is easiest for you to pick it up. (I used to use Ship Happens in Sumas since I live in Mission. I think they charged $4.00.) It will add to the cost, though, so you might as well order a bunch of other stuff from Brownell's while you're at it - which unfortunately is easy enough. Forget having it shipped across the border, however as it will end up being prohibitively expensive. UPS' customs charges are exorbitant from what I've heard. FedEx less so but their shipping is higher.

:) Stuart
 
Last edited:
I've been in contact with Dupont to see if it can I can get it here in Canada.
The product sold by Brownells is a Teflon S Coating. Will keep you updated as soon as they phone be back - Should be tomorrow or the day after.
 
Gun-Koat is what you need.
https://www.kgcoatings.com/index.php?_a=viewCat&catId=26

Buy the stuff in liquid and spray it on with a $15 air-brush.
The original stuff (2300) was what I used to use on the motors of the racebikes I built, and it made them run measurably cooler than before I coated them. The finish is very durable.
The key to best finish is good surface prep and thin coats.
The nice thing about buying a pint for $28 is that you have enough to do lots of stuff. Or you can sell what you don't use.
 
You must log in or register to reply here.
Back
Top Bottom