The bullet is touching one side of the chamber?

[frward]

i tried to find the maximum lenght of ammo for a rifle and i found out that the bullet is touching on one side all the way down to the minimum lenght in books? and the bullet start touching rifling at 68/1000 of an inch longer than maximum lenght for the caliber?

is there something i am doing wrong or it is only the chamber not in line with bore?

 

[308BAR]

It could be that there is a litte bit of run out when you seated your bullet. My guess anyways.

 

[Levi Garrett]

rounds fired thru the gun,?
is this the only example, or all come up this way....?
there always is a bit of a angle off, even norma match , did not expect that.
How do they shoot?

 

[Dogleg]

The ejector button will keep the cartridge pinned against one side of the chamber.

 

[frward]

i did not used the bolt to test it with my dummy round and it still does so i dont know what cause this.

yes it fired with standard lenght. now i triy to maximize cartridge lenght.
It was shooting at around 1'' @ 100 yds before so i want better. it is a win model 70 in 300 wsm left hand featherweight

 

[Dmay]

Check the run-out of your dummy round....and make sure the brass you're using for making the dummies has been fired in your chamber.....and just neck-sized.....


Just suggestions....