The Future of Semi Auto Rimfire is Here!

G

Grey Birch

Expired Business Member
Introducing the Grey Birch Fusion Receiver System.

We are proud to launch the brand new, patent pending, Grey Birch Fusion Receiver System (FRS). The Fusion system is a big step forward in improving, not only the accuracy, but the consistency of accuracy in semi auto rimfire. The future of semi auto rimfire is here.

The Fusion Receiver System (FRS) is a cutting edge, proprietary receiver and barrel system to Grey Birch Solutions and will come fully assembled from the factory. Just add your Grey Birch bolt, preferred trigger/stock and your sub MOA build is ready to go!

The Fusion Receiver System (FRS) will be available in 2 models;

LDR (Long Distance Ready) Receiver, with Integrated 20 MOA Rail and 16.1" Barrel

RDR (Red Dot Ready) Receiver, with Red Dot Plate System and 12.5" Barrel

To purchase and learn more, go here: http://greybirchsolutions.com/ldr-fusion-receiver-system/


ZBgXtIeh.jpg


f8fePDrh.jpg


XSvCVbbh.jpg


j7qGUmBh.jpg


UsAeGzdh.jpg
 
vultr said:
To be clear, these are barreled actions or complete rifles?
Click to expand...

We are launching barrelled actions called the "Fusion Receiver System (FRS)". These are now available for purchase on the website. Details can be found at the link in the original post.

When we re-launch our rifles in a few weeks time, the FRS will come standard in our rifle offerings.

Hope that makes sense.

Thanks for the question.
 
So I was looking at this as I am looking for a new 22. Usually with a barrel nut a barrel swap on a center fire is easy peasy. A headspace gauge and a wrench pretty much covers it.

I see these are factory swap only.. That definitely takes away from the appeal. Is it just a liability issue or is there something else?
 
Blygy said:
So I was looking at this as I am looking for a new 22. Usually with a barrel nut a barrel swap on a center fire is easy peasy. A headspace gauge and a wrench pretty much covers it.

I see these are factory swap only.. That definitely takes away from the appeal. Is it just a liability issue or is there something else?
Click to expand...

Hi, thanks for the question. The Fusions are built off the 10/22 platform. There is no manufacturer in existence that makes aftermarket barrels for this system. The system is proprietary at this stage. We may offer some barrel options in the future (full steel, longer lengths etc), at which time we'd likely include a wrench for the swap, but until then, these will be assembled and tested in the factory. Hope that clarifies. Thanks.
 
Hey I’ve got a really nice IBI at 15 barrel and Timney trigger, are you interested in a trade??

All jokes aside , that a pretty good price .
I’m interested for sure.

Can any handguard be attached to the receiver?
 
You must log in or register to reply here.
Back
Top Bottom