The love of the odd balls

I have some old 1894 winchester reloading tools, i have used to reload for 1886 win's, 38-70,33wcf,40-70,40-82,40.65,45-70,45-90. Have tools for 38-56 but no gun so far. Also have reloaded for 50-110 express, Looking for a 1894 reloading tool in 50-110 -300 express or 50-110-450 if anybody knows of one for sale?? i reload for 351 winchester, 44 russian, 445 schoefield, 6.8 spc, 38-72 , 44-40, 25-35, 32-20, 348, 32 S&W, 38 S&W, 45 Colt.
Havent had much time in the last few years to reload much, hopefully in the future, I will find time to get back to it and get the old guns shooting again.
 
Here's some .351 ####!
8E1OTLgl.jpg

-232 custom cast JSP bullets
-50 original factory rounds in box
-71 once-fired brass and 20 new brass cases
-1 spare 5 round magazine
-1 complete set of .351 reloading dies
 
Why not? said:
Just neck down 375 H&H brass. One pass through the sizing die, adjusted so the bolt will just barely close on the resized case, and you have perfectly headspaced brass. Load and go to the range!

Don't use reduced loads. Full power loads will firform brass perfectly, and shoot to the same point of impact as loads in fireformed brass.

Ted
Click to expand...

This has me wondering if it'd be possible to make 7mmSTW out of 375H&H? Suppose just one more run through the dies
 
Was chatting with my Dad last night .... we were speaking about a rifle of a friend of his (Recall them shooting this rifle when I was a kid).

It was built on a P14, 220 Swift case blown out to a .228 with a 45 degree shoulder.

now that's an oddball to me.
 
Can I play? I have a 32-20, which I don't find that much of an odd-ball, I've been forming brass for the .17 AH for about 20 years and I just ordered a 32 H&R barrel for my G2. I've got to think about any others that might be lurking in the back of the safe.
 
handofzeus said:
Here's some .351 ####!
8E1OTLgl.jpg

-232 custom cast JSP bullets
-50 original factory rounds in box
-71 once-fired brass and 20 new brass cases
-1 spare 5 round magazine
-1 complete set of .351 reloading dies
Click to expand...

Nice.Just getting into loading for the .351 SL myself.Have a set of RCBS .351 SL dies and Jamison .351 brass and bullets on the way.Do you have a pet load for the .351?Plan on using IMR 4227 myself.
 
Is the 35 Rem an odd ball? I think so...

Anyhow, I'm happy with the old girl. Got 'er on paper @ 50m and took 'er to 100m, where I shot the group @ the top of the plate & just right of point of aim.

Adjusted the scope & then fired the group just above the green dot.

With this LeverEvolution ammo, I'd say anything inside of 200m is in serious trouble come hunting season!

Cheers
Jay

 
You must log in or register to reply here.
Back
Top Bottom