The only Glock I need ..

Horilka

Horilka

CGN Ultra frequent flyer
Rating - 99.7%
396   1   0
Location
Toronto, ON
.. is Khyber Pass one in 7.62x25, tovarischi comraden communisten und comsomolzten. Only evil capitalist plastic can unwarp the full potential of our famous 7.62x25 great mighty cartridge. (We don't tell anyone that we simply stole and renamed German 7.63x25, it will be our secret!)

FqZFNoGWAAIVu6T


FqZFNygWcAIQAgS
 
gewehr76 said:
In all Pakistani Youtube gun related videos I've seen 7.63 or 7.62 tok are called 30 Bore or as on the slide 30 pistol. They do know their calibers
Click to expand...

My Norinco NP762 says .30 Bore on it.

My friend and I call our 7.62x25 reloads .30 Bore in honour of the jankiness of the Khyber Pass ammo. Ours isn't nearly as sketchy as theirs, but we use .223 cut down, .223 blanks cut down, surplus brass Berdan 7.62x25 converted to Boxer and reamed to take large pistol, all different kinds of cast bullets like .32 SWCs sized down to .311, etc.
 
And what's up with that safety? And trigger for that matter?

Is this a commercial Glock that has been converted to x25 or a from-scratch build?
 
.30/06 FTW said:
My Norinco NP762 says .30 Bore on it.

My friend and I call our 7.62x25 reloads .30 Bore in honour of the jankiness of the Khyber Pass ammo. Ours isn't nearly as sketchy as theirs, but we use .223 cut down, .223 blanks cut down, surplus brass Berdan 7.62x25 converted to Boxer and reamed to take large pistol, all different kinds of cast bullets like .32 SWCs sized down to .311, etc.
Click to expand...

Hats off to you sir, that's a lot of work to do that conversion. I tried to do that as well, before S&B and PPU as well as starline brass came to promenance. However now I just use boxer sp cases. done the 223 conversion before as well which require a lot of modification and brass thinning, certainly doable for 30 bore.
 
gewehr76 said:
Hats off to you sir, that's a lot of work to do that conversion. I tried to do that as well, before S&B and PPU as well as starline brass came to promenance. However now I just use boxer sp cases. done the 223 conversion before as well which require a lot of modification and brass thinning, certainly doable for 30 bore.
Click to expand...

Honestly it's quicker than doing the .223 conversion, but we only had about a dozen cases to do. Drilling the hole to convert to Boxer is way quicker than cutting, trimming, and reaming, and the Berdan primer pockets are about halfway in between small and large pistol so it's not that much more reaming than reaming the crimps out of the .223 primer pockets.
 
prairieguy said:
Ammunition based take down. No levers required. Like Glock you just have to pull the trigger. Unlike a real Glock you do not have to proceed to step two y down the release bar
Click to expand...

Ahhh yes, that classic "ammunition based takedown". It also launches the slide to your enemy so they can lube it, with their brains.
 
You must log in or register to reply here.
Back
Top Bottom