The Stag 10s NR stripped receiver set thread

rambones said:
KAC mags can be pulled out by hand and pmags work fine seemingly.

Anyone else notice their mags can be pulled out by hand?
Click to expand...

Only the KAC and DPMS mags. I actually suspect the rivet for the tightness. Pmags and asc 10 round pistol mags drop free.
 
DaveMachine said:
Pmags function fine for me. IMI mags can be removed by pushing the mag to the right then down, despite tightening the mag catch a couple extra turns.
Click to expand...

That's not good, that's the same issue as mine. Wondering if it's the magwell size.

I will take a pic side by side with KAC later, seems magwell is very loose or mag catch is not engaging enough.

Again I am not talking about dropping free, im talking about accidentally dropping mags and inadvertently being removable without hitting the
Mag release.
 
Your statements are not exactly accurate Shooter1971.

IRUNGUNS has a 25% restocking charge on all cancelled orders. This is clearly stated upon checkout and on the payment confirmation you received after agreeing to make the purchase. The email you sent us to cancel your order was quite clear. This is store policy, the restocking charge is there to recoup the costs of restocking products after they are purchased, especially serialized items. There are several costs incurred when processing sales that require export to another country, these expenses are factored into the purchase, but if the purchase is canceled these funds are used to recover those costs.

The person you dealt with at IRUNGUNS offered to use the restocking charge towards the purchase of a receiver set once they came into Canada and an email was sent to you explaining that. Unfortunately, the store had built all the receiver sets into rifles which was unknown at the time the email was sent. So, it was explained to you that should a customer cancel one you would be first on the list or we will apply that restocking charge to a completed rifle. We can not offer something we do not have in stock.

I am sorry you are not happy with the outcome, but the offer still stands. Putting it on our forum is not going to change this.


Shooter1971 said:
I sent them an email requesting full refund or I was calling ViSa. Minutes later received a refund MINUS 25%. I am so sick of this company
Click to expand...
 
IRUNGUNS said:
Your statements are not exactly accurate Shooter1971.

IRUNGUNS has a 25% restocking charge on all cancelled orders. This is clearly stated upon checkout and on the payment confirmation you received after agreeing to make the purchase. The email you sent us to cancel your order was quite clear. This is store policy, the restocking charge is there to recoup the costs of restocking products after they are purchased, especially serialized items. There are several costs incurred when processing sales that require export to another country, these expenses are factored into the purchase, but if the purchase is canceled these funds are used to recover those costs.

The person you dealt with at IRUNGUNS offered to use the restocking charge towards the purchase of a receiver set once they came into Canada and an email was sent to you explaining that. Unfortunately, the store had built all the receiver sets into rifles which was unknown at the time the email was sent. So, it was explained to you that should a customer cancel one you would be first on the list or we will apply that restocking charge to a completed rifle. We can not offer something we do not have in stock.

I am sorry you are not happy with the outcome, but the offer still stands. Putting it on our forum is not going to change this.
Click to expand...

This has what to do with this thread exactly?

Shawn
 
Well I just installed my Eclipse trigger in my stag...

I do have to say that the "milspec" stag trigger is very good, crisp and consistent for an OEM part. I'm definitively keeping it for other applications :)

Stag OEM trigger:
THKeOyc.jpg


BRc0CjG.jpg

qtTvLEV.jpg
 
rambones said:
That's not good, that's the same issue as mine. Wondering if it's the magwell size.

I will take a pic side by side with KAC later, seems magwell is very loose or mag catch is not engaging enough.

Again I am not talking about dropping free, im talking about accidentally dropping mags and inadvertently being removable without hitting the
Mag release.
Click to expand...

Here's some similar posts.

Bombsquad68 said:
Thanks Griffin, yours does appear the same. If you get the chance to try other mags, let me know.

This is fully seated with the match latch resting in the receiver, tightening it just pulls the button tighter into the spring and makes the threads protrude from the button... the only way I think I can get it to protrude further into the magwell would be to machine the receiver somewhat where the latch seats, or modify the magazine latch itself with a grinder around the stem and remove some material ?
Click to expand...

Bombsquad68 said:
I've got an out of spec lower that isn't locating the mag latch into the magwell enough. Arms East contacted me right away to fix so good on them, but it seems I got the 1 in 10,000 out of spec part... Talking to Stag next week to figure it out. Magpul, Lancer, IWI mags all pop out, only XCR-M mags hold in there solid.

For those wondering, the steel JP LMOS isn't quite as light as the Brownells TI BCG, it's 14.5 oz.
Click to expand...
 
One of my sets has a fair sized chip out of it. I think TeeJay has two receiver sets that are chipped in the exact same spot. I’m not too happy that Arms East deleted both of our posts.
 
Mike112288 said:
What’s the deal with the hyperfire trIgger. Is it better than the other aftermarket triggers? Or just a different design?
Click to expand...

Different design.
Light trigger pull but the additional springs retain inertia for proper ignition. I found mine to have a bit more creep than I wanted and a slight delay on ignition. Its almost like its cammed over so once it does break it takes a moment to rotate over that cam and then the additional springs slam it home onto the firing pin. If you dry fire with just the lower and your hand over the hammer you'll see what I mean.
I think they are the lightest pull trigger you can get that are not a 1 piece pack.
I sold my Hiperfire 24 3G and bought a Timney Calvin Elite. Just haven't installed it yet to test it. I liked the 2.5 lb pull of the Hiperfire but found mine had more creep than the green Velocity 3.5 lb trigger pack from Brownells.
 
So far I have tried KAC, Pmags and XCR 10rd mags in my STAG10 lower, and only KAC mag seems to be able to pull out by hand. Sucks, but not end of the world as long as they actually fuction. Will be a few months at least till I have all the parts to actually shoot this thing.

Trigger is indeed pretty decent.
 
griffin86 said:
One of my sets has a fair sized chip out of it. I think TeeJay has two receiver sets that are chipped in the exact same spot. I’m not too happy that Arms East deleted both of our posts.
Click to expand...
Is it on the right side magwell lip? That's where mine is...
 
Mine has the mag well chip also and the mag catch does not work at all. It looks like the recess that the mag catch sits in is not deep enough and the mag catch looks like its flush inside the magwell.
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom