Mike112288
CGN Ultra frequent flyer
- Location
- Winkler
@ultimatumD you guys aren’t offering any of these barreled actions with a 223 barrel are you?
The Ultimatum Deadline has arrived
- Thread starter UltimatumD
- Start date
UltimatumD
Expired Business Member
...as our action testing included .223.Mike112288
CGN Ultra frequent flyer
- Location
- Winkler
Lol pm me then ��
vultr
Regular
That's awesome! I've been holding out on picking up a chassis as wanted one of these. Thanks for following up!
vultr
Regular
And who carries/imports XLR? I thought they didn't have a distributor in Canada. Any word on an inletted LSS-XL?
UltimatumD
Expired Business Member
Not sure who imports XLR.
MDT will not have the LSS-XL inletted for a while. Only the ESS for now. That's what we were told anyways. You as their customer may have more pull than us.
Thanks
UltimatumD
Expired Business Member
MartyK2500
CGN Ultra frequent flyer
- Location
- Quebec
Just ordered your deadline receiver with an ESS from Mystic precision.
My plan would be to keep the same action through many barrel changes, and for many years, savage style shank easily allows this for me.
My question would be, what parts would be required for long term maintenance and if they can be eventually purchased?
I'm thinking most probably firing pin and firing pin spring, I see you sell bolt heads so having a spare one will also take care of extractors and extractor springs.
Before purchasing I also didn't notice the top rail is aluminium, but looks beefy.
I assume that torq specs and Loctite type will be specified in instructions? Should be good enough to hold something heavyweight like a razor gen ll on a spuhr mount?
Setup will be a low recoil 308
My plan would be to keep the same action through many barrel changes, and for many years, savage style shank easily allows this for me.
My question would be, what parts would be required for long term maintenance and if they can be eventually purchased?
I'm thinking most probably firing pin and firing pin spring, I see you sell bolt heads so having a spare one will also take care of extractors and extractor springs.
Before purchasing I also didn't notice the top rail is aluminium, but looks beefy.
I assume that torq specs and Loctite type will be specified in instructions? Should be good enough to hold something heavyweight like a razor gen ll on a spuhr mount?
Setup will be a low recoil 308
UltimatumD
Expired Business Member
Action carries lifetime support, so you don't have to buy parts. email us if you wish to buy spares.
Aluminum rail is beefy and held by 6 8x32 screws plus 2 dowel pins. we have had heavy scopes mounted without any issues. Steel rails can be ordered as well at an extra cost. Torque specs can be found on our website.
Thanks
