The "What Have You Reloaded Today" thread

[dirtybarry]

That's weird. I didn't fill out anything at my location when buying primers.

Same in Calgary. Ask for primers, get primers, show PAL at the till. pay and leave. No recording of anything.

 

[RedDragon]

De-primed and tumbled around 500 45ACP brass.

 

[laker415]

Same in Calgary. Ask for primers, get primers, show PAL at the till. pay and leave. No recording of anything.

I didn't even show my pal. She asked for it at the till and I asked her why. Didn't show anything

 

[Mobular]

That's weird. I didn't fill out anything at my location when buying primers.

The location recording component sales is Langley.

 

[vagrantviking]

Put together 150 44mag with 200gr lee RNFP cast from range lead. Powder is 6gr of titegroup.
Maybe should have waited and just done 25 to test but I'm sure they will be good in at least one of the 3 44's I've got.

 

[vagrantviking]

Finished 50 rounds of 45acp with 230gr plated bullets over 3.5gr WinAA Plus.
Hopefully less dirty than the alox lubed cast. Should have bought more plated at the Lethbridge gun show.

 

[JR Hartman]

tumbled, deprimed, prepped the primer pockets on 60 odd 7.5x55 Swiss BERDAN brass.

hands are shot.

 

[lister]

Finished off my 357mag. brass with a 158gr. SP over 10.5gr Blue Dot, then loaded some 38 special with 130gr. LSWC over 5.6gr SR-4756.

Found the 5.6gr a little hot for my purpose, so reduced to 5.4gr. Loaded about 50-60 to test.

 

[laker415]

Processed some hornady match 308 brass....time for a dillon super swage! Put together the last of my 168 grain match over some BLC2. Put together some 150 FMJ over IMR4064 to develop a "minute of gong" plinking load and last but not least, ran 100 rounds of 147 grain hollow points over some HS6.

 

[kevinc]

Deprimed then sized 250 .308

 

[Hitzy]

Working up some 7mm Rem Mag loads with 110gr moly coated TTSX....hoping for 3500fps when I'm done.

 

[cheaplaughs]

10rnds of 308 and prepped & primed 40 more

 

[cheaplaughs]

Processed some hornady match 308 brass....time for a dillon super swage! Put together the last of my 168 grain match over some BLC2. Put together some 150 FMJ over IMR4064 to develop a "minute of gong" plinking load and last but not least, ran 100 rounds of 147 grain hollow points over some HS6.

awesome setup

 

[laker415]

Thanks a lot. It is starting to come together.

 

[yomomma]

And yet more 12 gauge slugs

 

[kamlooky]

Did a box of 7mm Rem Mag.
Never owned one before and gonna go shoot this gal.

 

[wkmiller]

I put together the first 20 9mm Luger rounds to make sure they work before loading a whole bunch. They were 115gr campro on top of 4.9gr (minimum load according to Hodgdon data) of CFE pistol powder. My son took them to the range and said they would develop enough power to eject the case from his Smith and Wesson M&P. Do you think I just need more powder or is there something else going on that I am missing.

 

[Kingshow]

.300WM, H1000 with 180gn accubonds. Just working up my first rifle round

 

[bcnorth]

Got almost 1k of 45acp done
230gr cast over titewad.

 

[Armored Metal]

50X.223rem 53g V-Max with 23.8g of H-335.