The "What Have You Reloaded Today" thread

[Silfield]

Had a busy day at the bench on Saturday, ready for Sundays shoot:
80 x .223, 69 grn SMK, 25.5 grns Viht N140
25 x 8 x 60R, 220 grn NOE boolits, 12 grns Unique
20 x 577/450, 70 grns ffg, 520 grn boolits
50 x 8 x 57 Mauser, 198 grn PPU Match, 46.5 grns N140

Took an old fella shooting for the first time in 50 + years-he loved it and was smiling like a cheshire cat! Poor old chap has cancer so I am doing my bit to ease the burden on his last few months.

 

[Andy]

Working up some 7mm Rem Mag loads with 110gr moly coated TTSX....hoping for 3500fps when I'm done.

That should be doable. I'd buy some Re26 from "X-Reload" - slightly slower than IMR7828, but more dense. Probably your best bet for highest MV anyways IMO.

 

[hillbillywilly85]

I took a 100 32-20 win cases and sized them down to 25-20 win cases . Took some time and a gentle touch during a few steps. But I only lost 2 cases.
If I knew how to add pics from a tablet, I would.

 

[Budweiser2]

Just set up the dies for my 9 mm and racked up a couple of boxes . My boys then arrived and it was time have a few cold ones. So back at it in a couple of days.

 

[Chuckbuster]

I just loaded 350 9mm rounds over the weekend...a little bit here, a little bit there. Some say why bother with 9mm, but hey, I like it.

124gr copper plated over 5.6gr of Power Pistol...my last can of that powder.

 

[JR Hartman]

100 rounds of .223

55grn Hornady FMJBT over 23grns of TAC lit by a CCI small rifle primer. light-medium crimp with Lee Factory Crimp die. Mixed brass.

 

[BillD]

Working up some test .357 Magnum loads...

 

[Alpheus]

Annealed and sized 100 6x47L and 100 284 Shehane cases last night. Just need to do another 100 of each, trim 'em and load for the weekend.

 

[captainmike]

starting to prep my 308 brass for my F/TR season 800 brass deprimed and cleaned

 

[Attilathecanuk]

Prepped 200 .45ACP cases (sized and primed) and loaded
6@ 4.3 gr titegroup
6@ 4.5 gr titegroup
all under 230 fmj's

Tomorrow gonna load same but with 700x and see how the 1911 likes 'em! Then load the rest with winning load.

 

[Brutus]

10 gauge black powder buckshot handloads:

-Parker Bros. 2 7/8 all brass hulls
-CCI Large Pistol Primers
-90 grains FFG
-Circle Fly wads and over shot cards
-Number 4 buckshot (40 pellets)
-Grex buffer
-Top sealed with RTV Silicone securing the card

 

[woodlotowner]

I'm about to reload some .308 ME with all new components/dies for the 'new' MXLR. An interesting cartridge. Almost .308 Win ballistics in a lever rifle. Yes, I have LeverEvolution...

 

[Outcast]

Punched out some 45-70 30 rounds of training rounds...36.5 GR IMR4198 and 10 bear rounds 39.5 GR under a 405 GR FNP.

 

[BAC4]

Just loaded up some 35 Whelen rounds. Resized Remington 30-06 Brass, CCI large rifle primers, 50 grains of IMR 4320 under Speer 220 Gr flatnose bullets.

 

[bsand]

Swagged 250 223 cases of Aguila. It weird some of the cases are super crimped others not so much
All are from same 1000 rnd box.

 

[kevinc]

12 rounds for the new M70 Alaskan .375 H&H using IMR4350 and Speer 270 Gr BTSP

 

[f55]

200 rounds of 40 S&W, 180gr campro bullets, 5.2gr unique.

 

[trebor2880]

I'm running out of powder to load my handguns. I'm down to a couple of pounds of Trail Boss, and a pound of Blue Dot.
Loaded up some test rounds to see how Blue Dot works in 9mm, 40, 45, 38, and 44mag.
Have test loads ready for them all Trail Boss, except 9mm. Couldn't get enough TB in the 9mm case to cycle the slide.

 

[KellyP]

Powder coated and loaded 200 x 9mm and 50 x 45acp. Goin to test out the lead residue tomorrow at the range. Got the PC from prismatic, I will keep ya all In the loop on how it goes......

 

[Loyalist]

Did a full case prep on 150 308. From fired to primed and ready to be reloaded for precision. Not much but a start as I feel the temp start to warm!!!!