The "What Have You Reloaded Today" thread

[salon_1928]

Loaded up 80 rounds of 7.5 Swiss to run through the K11. Had to alter the label a bit for style and because the boxes I chose hold 18 rounds instead of the usual 10. I like the extra splash of colour by adding the crests

Awesome! What brass?

 

[DiMP]

Awesome! What brass?

It is the new manufactured RUAG boxer primed brass that Calgary Shooting Centre is selling. Over a mid-range load (I'll confirm load next time I'm at the reloading bench) of IMR4064 and a cheap Campro 147gr projectile

EDIT TO ADD: I'm using 40.0gr of IMR4064

 

[DiMP]

Loaded up some light 44 Magnum loads using 9.0gr of Unique pushing out a 230gr cast bullet. I haven't shot this load yet, but I'm hoping it should be a little more enjoyable to shoot than full-power factory loads. I also used it as an excuse to design and make a new style box for my reloads

 

[woodchopper]

150 rounds of 30 Carbine

need to go shoot it all now

 

[f55]

300 blackout

Back, PC 230gr Lee 309, Berger 215gr Hybrid tactical

Front, Hornady bthp GR 195gr, Hornday 150gr bthp, Hornady 150gr sp

195gr Hornady shoot amazing out of my savage axis ii 16.5" barrel

 

[propliner]

190gr Accubond LR's for my new .308 rifle.

 

[6MT]

Love that pic!^

Time to prime…

Charge….

Seating & Crimping…

Add another hundred rounds of .357mag to the lock-up.

 

[JJ-65]

Finished up a 1000 round run of 223 topped with Speer TNT 50gr bullets. Just in time for snow gopher carnage.

 

[thump_rrr]

Just finished making 20 test rounds of each for tomorrow.
Powder coated .45 ACP 230gr over 5.1gr Win 231
44 Mag 240gr JSP over 19.9gr N-110
460 S&W 200gr FTX over 49.2gr H110
45-70 GOVT 300gr RNFP over 38.5gr IMR 4198

 

[timsinc]

Some 7x57 today, working up 120 TTSX with Big Game - so far looking good for speed and accuracy. 162 BT interlocks with 4064 and hopefully the last tweak on the 139 BT interlocks with H4350

 

[hr.rage]

I opted to start with 9mm for my first cartridges.




Load data:
- 124gr CamPro RN FCP
- 3.5-4.3gr Tite Group
- CamPro Ginex primer
- 1.120 overall length

 

[DGY]

I just reloaded my first 308, my first reduced loads! The a o is for my hunting buddy’s daughter, she is turning 12 and he is gifting her a nice little Husqvarna carbine in 308 and to start her the right way I decided to load her a few 150gn Speer hot-cor over 29.5gn of H4895 with federal 210 primers! It should be around 2000fps and have something like 9lbs of recoil… I’ll g zero it before he give it to her and then we will go shoot together!!

 

[bjmurata]

I opted to start with 9mm for my first cartridges.

View attachment 674959
View attachment 674958

Load data:
- 124gr CamPro RN FCP
- 3.5-4.3gr Tite Group
- CamPro Ginex primer
- 1.120 overall length

Oh..the addiction has started. No backsies from here on in!

 

[hr.rage]

Oh..the addiction has started. No backsies from here on in!

There is too much invested to turn back now

 

[250 sav]

Some trial loads for 303 savage with 190gr barnes original. Got 3 loads that are alright but going to work them up a bit. Using W748, imr4320, imr 4064.

 

[Kevinkd65]

Trimmed up a couple thousand 223. Sized up (lee push through die) some 340gr, 450gr and 500gr powder coated slugs (45-70). Working up some 223 loads this afternoon. Productive day so far.

 

[FLHTCUI]

I have not started reloading this yet, but the new to me 22 Hornet on the Brno Fox.
Been organizing bits and bobbs , just waiting for the crimp die and the flaring die to arrive and them assemble the press to a stand.
Oh and thanks to a member who listed a whole bunch of brass too.
Rob

 

[FLHTCUI]

whoops, double tap....

 

[woodchopper]

did a bunch of case prep the last few days, sorted out a bunch of 308 cases, mostly Winchester marked, but a bunch of other cases that needed the primer pockets reamed out, what a pain, I don't think its really worth the effort.

but now I have 300 cases sized trimed and primed. ( I have primers ) but now I need to find bullets for them the bulk of the 30 cal I have are mostly 200grn, just a little heavy for 308Win

 

[dan belisle]

did a bunch of case prep the last few days, sorted out a bunch of 308 cases, mostly Winchester marked, but a bunch of other cases that needed the primer pockets reamed out, what a pain, I don't think its really worth the effort.

but now I have 300 cases sized trimed and primed. ( I have primers ) but now I need to find bullets for them the bulk of the 30 cal I have are mostly 200grn, just a little heavy for 308Win

What weight are you looking for? - dan