The "What Have You Reloaded Today" thread

[Hmatt]

50x .223 40 gr nosler ballistic over 26 gr ramshot TAC.


Up next some 55 gr Speer .223



Ended up being 50x .303 180gr rn Speer hot cor over 38gr of 4064.. this is also my first batch with the Campro primers.

 

[Hmatt]

Made some 9.3x57 brass yesterday out of 30-06 range pick ups..

 

[big bear]

50 rds of 218Bee,45gr JHP, WW brass, Federal SRP, ,2400 powdere. Today 50rds of 30'06 PRIVI 180gr JSP moderate loads for my Browning 1895. While rummaging through some of my old IPSC reloading stuff (enough large pistol primers to last, well forever) I discovered some bricks of Large rifle primers,Winchester, Federal and CCI.

 

[6MT]

I was bored today, so I rolled up another 100 rounds of .45 Colt

7.0gr of TiteGroup
Campro 250gr FCP/TC

 

[Swiend]

I finally finished up 60 rounds of 7.62x54r, used up the last of my H4895 , looking for more. I might give Accurate 2495 a try.

 

[del3840]

.41 long colt, Hollow Base

 

[iron cat]

I have been setting up several 12 gauge loaders the last few days and sorting about 1 zillion wads and hulls of different types and gauges .
Have a truck load of stuff for our swap meet today at the range !
Cat

 

[6MT]

Loaded some 45-70 for my model 1886 Pedersoli.

Priming…

Charging…

Seating & crimping…

47.0gr IMR4198
350gr Campro FCP/TC
BR2 CCI
Starline brass

 

[Grizzlypeg]

Tested different seating depths for 155 grain SMK's after finding the best load with Varget was 46 grains. These are a little long, only .020 off the lands, but did they ever shoot well at 100 yards. That's a five shot group. Bergara B14 308 HMR I bought used on the EE.

 

[Hmatt]

Loaded up some 250 gr ECX 9.3x57 ladder load of 3031 40,40.5,41,41.5,42


Hoping to find the sweet spot for these hornadys as I plan to use them on game next season. Hopefully a moose if I get a draw!

 

[woodchopper]

25-06 with Nosler 110grn Accubonds

49grns IMR4350

loaded up 35 rounds to refill the 50 round box.


might do some 300WM today, I was checking and I have lots of 22-250 and 243 loaded up.

I also found a full box of 30-30AI that I'm going to end up pulling down for components as I have rebarreled that rifle.

 

[Butcherbill]

Finished up some 7.62x54r Mexican match last night, hopefully get to shoot it this week or weekend.

 

[6MT]

New rifle, new caliber. I rolled up 7 charge weights in virgin brass. My CBTO is a .005” set back from the lands (jump).

But I can’t do my break-in and first test until the second week of June. But ready to go.

 

[OldDude]

Tonight: a small batch of 308 Win, with Sierra 168 MatchKing bullets, and IMR 4320 powder.

 

[propliner]

100 count of these .300 Blackout with powdercoated NOE 225's and some CFE BLK.

 

[mikeyb]

Some refreshed handloads in .243 Winchester (trying Magnum primers to see if it solves the SD problems), .257 Weatherby Mag (tweaking OAL), and .300 Win Mag (starting loads were .308 Win velocity so kicking it up a little).

 

[dan belisle]

Been working on an old dillon 550 I picked up a while back. Got most of it sorted, just need new plastic tips for the magazine tube. Ran some 45 acp through just to make sure it works, with tunes from another one. Still a great progressive, even after all these years. - dan

 

[53moose320Elk]

Loaded up 215 - 9 mm 128 gr with some 800X , in prep for when my 9mm Ruger pc carbine shows up , that I won from Victory ridge , sticker draw
Also sized some 9mm projectiles from 360 to 356 for loading in some more 9mm

 

[OkayShooter]

Last time I had the 45acp out, I noticed I was getting leading. I was getting decent accuracy at 25 yards, with 5.0 grn w231 with the 200grn swc with tumble lube, but opened up to about 7inchs at 50.

So attempted to powder coat them. Turned out fine on the second coat. I kept on knocking off the powder handling it.



So loaded 200 grn swc, with 5.6 and 5.7gr w231 and some 5.2 grn with a longer oal.

Next batch of bullets are getting quenched as well, looking at 230grn TC bullet mold.

 

[OxxyFx]

I usually powdercoat all my bullets, like to color code them. My friends are calling them "Skittles" However today I would like to be attaching some nicely done 38SLP rounds for Cowboy action, this is how I get the wax into the groves. Each of these are going through a resizing die after they they have been pushed out from the vaxing bin.

I cannot find a way to attach an image....